MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Triumph Specifications

Triumph Rocket III (2004-05)

Entry updated

Triumph Rocket III (2004-05)

At a glance

Capacity
2294 cc / 140 cu in
Power
103.6 kW / 140 hp @ 5750 rpm
Torque
200 Nm / 20.4 kgf-m / 147ft.lbf @ 2500 rpm

The full picture.

The Triumph Rocket III is a motorcycle model that was produced in 2004-05. It features a four-stroke, longitudinal three-cylinder engine with a capacity of 2294cc and a bore x stroke of 101.6 x 94.3mm. The cooling system is liquid-cooled with a compression ratio of 8.7:1. The bike uses multipoint sequential electronic fuel injection and digital inductive ignition via electronic engine management. The bike can be started electrically and has a maximum power output of 103.6 kW/140 hp at 5750 rpm and a maximum torque of 200 Nm/20.4 kgf-m/147ft.lbf at 2500 rpm. The clutch is a wet, multi-plate and the transmission is 5-speed with a final drive that is shaft-based. The frame is made of tubular steel with a twin spine design, and the bike features 43mm upside-down forks for front suspension, and chromed spring twin shocks for the rear suspension with adjustable preload. It also has front brakes with 2 x 320mm discs and 4-piston calipers, as well as a single 316mm disc and 2-piston caliper for the rear brakes. The front wheel is 3.5 x 17 with a 5-spoke design, and the rear is 7.5 x 16 with the same 5-spoke design. The front tire size is 150/80 V17.


Technical specifications:

Make Model: Triumph Rocket III

Motorcycle technical specifications
Year2004 – 05
EngineFour stroke, longitudinal three cylinder, DOHC, 4 valves per cylinder
Capacity2294 cc / 140 cu in
Bore x Stroke101.6 x 94.3 mm
Cooling SystemLiquid cooled
Compression Ratio8.7:1
InductionMultipoint sequential electronic fuel injection
IgnitionDigital inductive type via electronic engine management
StartingElectric
Max Power103.6 kW / 140 hp @ 5750 rpm
Max Torque200 Nm / 20.4 kgf-m / 147ft.lbf @ 2500 rpm
ClutchWet, multi-plate
Transmission5 Speed
Final DriveShaft
FrameTubular steel, twin spine
Front Suspension43 mm Upside down forks
Rear SuspensionChromed spring twin shocks with adjustable preload
Front Brakes2 x 320mm Discs, 4 piston calipers
Rear BrakesSingle 316 mm disc, 2 piston caliper
Front Wheel3.5 x 17, 5 spoke
Rear Wheel7.5 x 16, 5 spoke
Front Tyre150/80 V17