Royal Enfield Bullet 350 (1965)

The Royal Enfield Bullet 350 motorcycle from 1965 uses a four-stroke, single cylinder, OHV, SI engine with a capacity of 346cc and a bore and stroke of 70 x 90mm. It is air-cooled with a compression ratio of 6.5:1 and uses an Amal Monobloc induction with a breaker and coil ignition system. Starting is kick-start only, and it has a maximum power of 21hp at 5250rpm and maximum torque of 28Nm at 4000rpm. It has a multi-plate, wet clutch and 4-speed transmission with chain final drive. The frame is made of welded steel, and the bike has telescopic fork front suspension and swing arm rear suspension with 2 dampers. The front brakes are twin-lead internal expanding drum brakes, and the rear has a foot-operated, 153mm drum. The tyres are both 3.25-19 size, and its dimensions are length 2140mm, width 800mm, and height 1030mm, with a wheelbase of 1370mm and a seat height of 800mm. The wet weight of the Royal Enfield Bullet 350 is 180kg and it has a fuel capacity of 13.5 litres or 3.5 US gallons.

Technical specifications:

Make Model: Royal Enfield Bullet 350

Year: 1965 –
Engine: Four Stroke, single Cylinder, OHV, SI Engine, Twinspark
Capacity: 346 cc / 21.1 cu-in
Bore x Stroke: 70 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 6.5:1
Induction: Amal Monobloc
Ignition: Breaker & coil
Starting: Kick
Max Power: 21 hp 15.3 kW @ 5250 rpm
Max Torque: 28 Nm / 15.4 lb-ft @ 4000 rpm
Clutch: Multi-plate, wet
Transmission: 4 Speed
Final Drive: Chain
Frame: Welded steel
Front Suspension: Telescopic fork
Rear Suspension: Swing arm w/2 dampers
Front Brakes: Twin lead internal expanding drum breake
Rear Brakes: Foot operated, 153 mm drum
Front Tyre: 3.25 – 19
Rear Tyre: 3.25 – 19
Dimensions: Length 2140 mm / 84.2 in Width 800 mm / 31.5 in Height 1030 mm / 40.5 in
Wheelbase: 1370 mm / 53.9 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 180 kg / 416.6 lbs
Fuel Capacity: 13.5 Litres / 3.5 US gal