The Royal Enfield Bullet 350 motorcycle from 1965 uses a four-stroke, single cylinder, OHV, SI engine with a capacity of 346cc and a bore and stroke of 70 x 90mm. It is air-cooled with a compression ratio of 6.5:1 and uses an Amal Monobloc induction with a breaker and coil ignition system. Starting is kick-start only, and it has a maximum power of 21hp at 5250rpm and maximum torque of 28Nm at 4000rpm. It has a multi-plate, wet clutch and 4-speed transmission with chain final drive. The frame is made of welded steel, and the bike has telescopic fork front suspension and swing arm rear suspension with 2 dampers. The front brakes are twin-lead internal expanding drum brakes, and the rear has a foot-operated, 153mm drum. The tyres are both 3.25-19 size, and its dimensions are length 2140mm, width 800mm, and height 1030mm, with a wheelbase of 1370mm and a seat height of 800mm. The wet weight of the Royal Enfield Bullet 350 is 180kg and it has a fuel capacity of 13.5 litres or 3.5 US gallons.
Technical specifications:
Make Model: Royal Enfield Bullet 350
| Year | 1965 – |
|---|---|
| Engine | Four Stroke, single Cylinder, OHV, SI Engine, Twinspark |
| Capacity | 346 cc / 21.1 cu-in |
| Bore x Stroke | 70 x 90 mm |
| Cooling System | Air Cooled |
| Compression Ratio | 6.5:1 |
| Induction | Amal Monobloc |
| Ignition | Breaker & coil |
| Starting | Kick |
| Max Power | 21 hp 15.3 kW @ 5250 rpm |
| Max Torque | 28 Nm / 15.4 lb-ft @ 4000 rpm |
| Clutch | Multi-plate, wet |
| Transmission | 4 Speed |
| Final Drive | Chain |
| Frame | Welded steel |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swing arm w/2 dampers |
| Front Brakes | Twin lead internal expanding drum breake |
| Rear Brakes | Foot operated, 153 mm drum |
| Front Tyre | 3.25 – 19 |
| Rear Tyre | 3.25 – 19 |
| Dimensions | Length 2140 mm / 84.2 in Width 800 mm / 31.5 in Height 1030 mm / 40.5 in |
| Wheelbase | 1370 mm / 53.9 in |
| Seat Height | 800 mm / 31.5 in |
| Wet Weight | 180 kg / 416.6 lbs |
| Fuel Capacity | 13.5 Litres / 3.5 US gal |
