Moto Morini 350 X2 Kanguro (1984-88)

The Moto Morini 350 X2 and X3 Kanguro were produced from 1984 to 1988. It has a four-stroke, 72-degree V-twin engine with a capacity of 344 cc and a compression ratio of 11.0:1. It has 2 valve per cylinder pushrod operation, dual Dell’Orto VHBZ 25BS carburettors and an electronic Kokusan ignition. It has a maximum power of 35hp at 8000rpm, and a maximum torque of 25.7 Nm at 7000 rpm. The transmission is a 6-speed, with a chain final drive. The bike has 35mm Marzocchi front forks and a Marzocchi monoshock rear suspension, as well as single disc brakes on both the front (230mm) and rear (136mm) wheels. The front and rear tyres are 3.00 V21 and 4.00 V18, respectively. The bike has a wet weight of 160.0 kg and a fuel capacity of 14 litres.

Technical specifications:

Make Model: Moto Morini 350 X2 / X3 Kanguro

Year: 1984 – 88
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 344 cc / 20.9 cu-in
Bore x Stroke: 62 x 57mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 2x Dell’Orto VHBZ 25BS carburetor
Ignition: kokusan electronic
Starting: Electric
Max Power: 35 hp / 25 kW @ 8000 rpm
Max Torque: 25.7 Nm / 19 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 35mm Marzocchi forks
Rear Suspension: Marzocchi monoshock
Front Brakes: Single 230mm disc
Rear Brakes: Single 136mm disc
Front Tyre: 3.00 V21
Rear Tyre: 4.00 V18
Wet Weight: 160.0 kg / 352. lbs
Fuel Capacity: 14 Litres / 3.7 US gal