Moto Guzzi  V7III Milano (2018)

The 2018 Moto Guzzi V7III Milano is a four-stroke, V-twin motorcycle with a longitudinal-mounted engine and air cooling. It has a capacity of 744 cc, with a compression ratio of 9.6:1 and Weber-Marelli electronic injection induction. The engine produces a maximum power of 52 hp and a maximum torque of 44.2 lb-ft. The transmission is 6-speed with a final drive shaft. The frame is a double cradle tubular frame made of ALS steel with detachable elements. The front suspension is made up of Marzocchi 40 mm telescopic front forks, while the rear suspension consists of a die-cast alloy swing arm with two shocks that are adjustable for spring preload. The front brakes are 320 mm stainless steel floating discs with Brembo callipers that have 4 differently sized opposed pistons. The rear brakes are a 260 mm stainless steel disc with a floating calliper with 2 pistons. The motorcycle has an 18-inch lightweight alloy front wheel and a 17-inch lightweight alloy rear wheel. The front tyre is 18 inches, and the rear tyre is 17 inches. It has a wet weight of 193 kg and a fuel capacity of 21 litres. The bike has a length of 2184 mm, a height of 1110 mm and a ground clearance of 150 mm. The seat height is 770 mm, and the wheelbase is 1445 mm.

---

Technical specifications:

Make Model: Moto Guzzi V7III Milano

Year: 2018

Engine: Four stroke, V twin, longitudinally mounted, OHV, 2 valves with light alloy pushrods and rockers

Capacity: 744 cc / 45.4 in

Bore x Stroke: 80 x 74 mm

Cooling System: Air cooled

Compression Ratio: 9.6:1

Exhaust System: 3-way catalytic converter with double lambda probe

Induction: Weber- Marelli electronic injection

Ignition: Magneti Marelli electronic digital

Battery: 12 V – 330 Watt Voltage 12 V – 14 Amph

Head Lamp: 12 V – 55/60 W

Starting: Electric

Exhaust system: 3 way catalytic converter with twin oxygen sensor

Max Power: 38 kW / 52 hp @ 6200 rpm

Max Torque: 60 Nm / 44.2 lb-ft @ 4900 rpm

Clutch: Single disc, dry, with cush drive

Transmission: 6 Speed

Final Drive: Shaft

Frame: Double cradle tubular frame. ALS steel. Detachable elements 1463 mm (57.6 inches)

Front Suspension: Marzocchi 40 mm telescopic front forks

Front Wheel Travel: 120 mm / 4.7 in

Rear Suspension: Die-cast alloy swing arm with 2 shocks with adjustable spring preload (~Ahlins fully adjustable for Racer)

Rear Wheel Travel: 93 mm / 3.6 in

Front Brakes: 320 mm stainless steel floating discs, Brembo callipers with 4 differently sized opposed pistons

Rear Brakes: 260 mm, stainless steel disc, floating calliper with 2 pistons

Front wheel: 18” in lightweight alloy (Stone), spoked (Special/Racer/Anniversario)100/90 (110/80 R18 as alternative)

Rear wheel: 17” in lightweight alloy (Stone), spoked (Special/Racer/Anniversario)130/80

Front Tyre: 18”

Rear Tyre: 17”

Rake: 26.4 degrees

Trail: 106 mm / 4.2 in

Dimensions: Length 2184 mm / 86 in Height 1110 mm / 43.7 in

Wheelbase: 1445 mm / 56.8 in

Seat Height: 770 mm / 30.3 in

Ground Clearance: 150 mm / 5.9 in

Wet Weight: 193 kg / 425 lbs

Fuel Capacity: 21 Litres / 5.5 US gal