MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Husqvarna Specifications

Husqvarna TE 125 (2011-12)

Entry updated

Husqvarna TE 125 (2011-12)

At a glance

Capacity
124.4 cc / 7.6 cu-in
Power
11kW / 15 hp @ 9000 rpm
Torque
12,1Nm / 8.9 lb-ft @ 8000 rpm
Seat height
930 mm / 36.6 in

The full picture.

The Husqvarna TE 125 was a motorcycle produced in 2011-12. It was powered by a four-stroke, single-cylinder, SOHC 124.4 cc engine with a liquid cooling system and 11.2:1 compression ratio. It had a 6-speed transmission and a wet, multi-plate clutch with hydraulic control. The maximum power output was 15 hp at 9000 rpm, with a torque of 8.9 lb-ft at 8000 rpm. The bike’s frame was a double-tube cradle with high-resistance steel round tubes, and the bike featured Paioli upside-down telescopic hydraulic fork suspension in the front and progressive “soft damp” type with single hydraulic shock absorber in the rear. The TE 125 had a ground clearance of 305 mm, a dry weight of 118 kg, and a fuel capacity of 9.5 litres. It was equipped with a single 260mm disc with 4-piston caliper in the front and a single 220mm disc with 2-piston caliper in the rear for braking. The bike had a seat height of 930 mm and a wheelbase of 1448 mm. The front and rear tires were 90/90-21 and 120/80-18, respectively.


Technical specifications:

Make Model: Husqvarna TE 125

Motorcycle technical specifications
Year2011 – 12
EngineFour stroke, single cylinder, SOHC, 4 valvess
Capacity124.4 cc / 7.6 cu-in
Bore x Stroke52 x 58.6 mm
Cooling SystemLiquid cooled
Compression Ratio11.2:1
LubricationWet sump with lobe oil pump and cartridge filter
InductionKEIHIN 29 carburetor
IgnitionCDI
StartingKick and electric
Spark plugNGK CR 8E
ClutchWet,multiplate type; hydraulic control
Max Power11kW / 15 hp @ 9000 rpm
Max Torque12,1Nm / 8.9 lb-ft @ 8000 rpm
Transmission6 Speed
Final DriveChain
Gear Ratio1st 2.833 (34/12) 2nd 1.875 (30/16) 3rd 1.364 (30/22) 4th 1.143 (24/21) 5th 0.957 (22/23) 6th 0.840 (21/25
FrameTypeDouble tube cradle with high resistance steel round tubes; rear frame with steel square tubes
Front SuspensionPaioliUpside-Down telescopic hydraulic fork with advanced axle
Front Wheel Travel250 mm / 9.8 in
Rear SuspensionProgressive “Soft Damp” type with single hydraulic shock absorber; spring preload adjustment
Rear Wheel Travel290 mm / 11.4 in
Front BrakesSingle 260mm disc 4 piston caliper
Rear BrakesSingle 220mm disc 2 piston caliper
Front Tyre90/90-21
Rear Tyre120/80-18
Trail102 mm / 4.0 in
Wheelbase1448 mm / 57.0 in
Seat Height930 mm / 36.6 in
Ground Clearance305 mm / 12.0 in
Dry Weight118 kg / 259 lbs
Fuel Capacity9.5 Litres / 2.5 US gal