MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Husqvarna Specifications

Husqvarna FE501 (2014-15)

Entry updated

Husqvarna FE501 (2014-15)

At a glance

Capacity
510.4 cc / 31.1 cu in
Power
45 hp / 32.8 kW
Torque
Nm / ft-lb @ rpm
Seat height
970 mm / 38.2 in

The full picture.

The Husqvarna FE 501 motorcycle has a four-stroke, single-cylinder, liquid-cooled engine with a capacity of just over 510cc. It has a Keihin electronic fuel injection system with a throttle body of 42mm and is capable of generating up to 45 horsepower and an unspecified amount of torque. The clutch is a wet multi-disc clutch DDS/Brembo hydraulics, with a transmission of 6 speeds which allows it to reach top speeds. The motorcycle has a chain final drive and a steel frame composed of chrome molybdenum steel tubing. The suspension consists of a WP Suspension Up Side Down 4CS forks for the front and WP Monoshock with linkage for the rear. The brakes for the front and rear are a 260mm and a 220mm disk, respectively. Tires for the front and rear are 90/90-21 and 140/90-18. It has a steering head angle of 63.5 degrees, trail of 107mm, and ground clearance of 345mm. The seat height is 970mm, the wheelbase is 1482mm, and the fuel capacity is 9.5 liters. The dry weight of the motorcycle is 113.5kg, and it has a maximum speed capacity.


Technical specifications:

Make Model: Husqvarna FE 501

Motorcycle technical specifications
Year201 4 -15
EngineFour stroke. single cylinder. SOHC. 4 valve per cylinder
Capacity510.4 cc / 31.1 cu in
Bore x Stroke95 x 72.0 mm
Compression Ratio12.8:1.
Cooling SystemLiquid cooling system, continuous circulation of cooling liquid with water pump
LubricationForced oil lubrication with 2 Eaton pumps
InductionKeihin electronic fuel injection and 42mm throttle body
IgnitionContactless, controlled, fully electronic ignition system with digital ignition timing adjustment
StartingElectric
Max Power45 hp / 32.8 kW
Max TorqueNm / ft-lb @ rpm
ClutchWet multi-disc clutch DDS / Brembo hydraulics
Transmission6 Speed, claw shifted
Final DriveChain 520 X-Ring
Primary Ratio24:73
Secondary Ratio14:52 (13:52)
FrameCentral tube frame made of chrome molybdenum steel tubing
Front SuspensionWP Suspension Up Side Down 4CS forks.
Front Wheel Travel300 mm /11.8 in
Rear SuspensionWP Monoshock with linkage
Rear Wheel Travel330 mm / 13.0 in
Front BrakesSingle 260 mm with 4 pot brake caliper
Rear BrakesSingle 220 mm with 1 pot brake caliper
Front Tyre90/90-21
Rear Tyre140/90-18
Steering Head Angle63.5 degrees
Trail107 mm / 4.2 in
DimensionsLength 2260 mm / 89.0 in
Wheelbase1482 +/-10 mm / 58.3 in
Seat Height970 mm / 38.2 in
Ground Clearance345 mm / 13.6 in
Dry Weight113.5 kg / 250.2 lbs
Fuel Capacity9.5 Litres / 2.8 US gal