The Horex Regina 250 was a motorcycle produced from 1955-1960. It had a four-stroke, single cylinder engine with a capacity of 249cc and a compression ratio of 6.35:1. It had a maximum power of 17 hp @ 6640 rpm and a 4-speed transmission with a chain final drive. The front suspension was hydraulic telescopic forks while the rear suspension was dual shocks. It had 150mm drum brakes on both the front and rear and rode on 3.25-19 and 3.50-19 tires. The dry weight was 140 kg/308.6 lbs and it had a fuel capacity of 13.5 litres/3.5 US gal.
Make Model: Horex Regina 250
Year: 1955 – 60
Engine: Four stroke, single cylinder.
Capacity: 249 cc / 15.1 cu-in
Bore x Stroke: 69 x 91,5 mm
Cooling System: Air cooled
Compression Ratio: 6.35:1
Induction: Carburetor
Ignition: 6 Volt
Starting: Kick
Max Power: 17 hp @ 6640 rpm
Transmission: 4 Speed
Final Drive: Chain
Front Suspension: Hydraulic telescopic forks
Rear Suspension: Dual shocks
Front Brakes: 150mm Drum
Rear Brakes: 150mm Drum
Front Tyre: 3.25 -19
Rear Tyre: 3.50 -19
Dry Weight: 140 Kg / 308.6 lbs
Fuel Capacity: 13.5 Litres / 3.5 US gal
Related link: winni-scheibe.com
Husqvarna's 2027 FC 250 uses a 249.9 cc engine. The published engine layout is 1-cylinder,…
For the 2027 KTM 125 XC-W, the manufacturer's technical sheet lists a 124.8 cc engine.…
The 2026 Triumph Speed Twin 1200 Cafe Racer Edition has a manufacturer-listed displacement of 1200…
Kawasaki's 2027 KLX140R uses a 144 cc engine. The published engine layout is air-cooled, 4-stroke,…
For the 2027 Suzuki DR-Z4SM, the manufacturer's technical sheet lists a 398 cc engine. The…
The 2027 Yamaha TT-R110E has a manufacturer-listed displacement of 110 cc. Its engine specification is…