MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Honda Specifications

Honda VFR1200 DCT (2011)

Entry updated

Honda VFR1200 DCT (2011)

At a glance

Capacity
1237 cc / 75.4 cu-in
Seat height
815 mm / 31.9 in

The full picture.

The Honda VFR1200F DCT (Dual Clutch Transmission) motorcycle was made in 2011 with a four-stroke, 1237 cc engine that has a bore of 81mm and a stroke of 60mm, providing a compression ratio of 12.0:1. The bike is liquid-cooled and includes PGM-FI electronic injection and digital transistorized ignition with electronic advance computerized control. The VFR1200F DCT has a 6-speed transmission with two automatic modes and manual mode and uses a shaft as its final drive. The chassis is double-beam cast aluminum, and the bike has a rake of 25.3 degrees and a trail of 101mm. The bike’s suspension includes an inverted telescopic fork in the front and a Pro-Link HMA gas shock in the rear, with a combined ABS braking system that includes hydraulic discs in the front and a hydraulic disc in the rear. The VFR1200F DCT weighs 267 kg and has a fuel capacity of 18.5 litres, providing an average consumption of 17.8 km/lit. The bike can reach a top speed of 251.2 km/h and complete standing quarter-mile in 10.8 seconds.


Technical specifications:

Make Model: Honda VFR 1200F DCT Dual Clutch Transmission

Motorcycle technical specifications
Year2011
EngineFour stroke, 76 degrees V-4, SOHC, 4 valve per cylinder
Capacity1237 cc / 75.4 cu-in
Bore x Stroke81 x 60 mm
Compression Ratio12.0:1
Cooling SystemLiquid cooled
InductionPGM-FI electronic injection
IgnitionDigital transistorized with electronic advance computerized control Ignition Timing: 6.4 degrees -10.4 degrees BTDC (idle speed) Sparkplug Type: IMR9E-9HES (NGK); VUH27ES (DENSO)
Spark PlugIMR9E-9HES (NGK); VUH27ES (DENSO)
StartingElectric
Max Power
Max Torque
ClutchWet, multiplate slipper type, Clutch Operation Hydraulic
Transmission6 speed with two automatic modes and manual mode
Final DriveShaft
Gear Ratio1 2.600 (39/15) 2nd 1.736 (33/19) 3rd 1.363 (30/22) 4th 1.160 (29/25) 5th 1.032 (32/31) 6th 0.939 (31/33)
Chassis TypeDouble beam cast aluminum vacuum mold Geometry direction: 25.5 degrees, 101 mm forward Swingarm: single-arm aluminum driveshaft
Front SuspensionInverted telescopic fork 41 mm HMAS cartridge-type with adjustable spring preload without positions,
Front Wheel Travel120 mm / 4.3 in
Rear SuspensionPro-Link HMAS gas shock, adjustable spring preload 25 positions,
Rear Wheel Travel120 mm / 4.3 in
Front Brakes2x Hydraulic discs 320mm floating, 6-piston radial calipers, Combined-ABS
Rear BrakesSingle hydraulic 276mm disc 2 piston caliper, Combined-ABS
Front Tyre120/70 ZR17M / C (58W)
Rear Tyre190/55 ZR17M / C (75W)
Rake (Caster angle)25.3 degrees
Trail101.mm / 4 in
DimensionsLength 2244 mm / 88.3 in Width 752 mm / 29.6 in Height 1222 mm / 48.1 in
Wheelbase1545 mm / 60.8 in
Seat Height815 mm / 31.9 in
Wet Weight267 kg / 613 lbs
Fuel Capacity18.5 Litres / 5.02 gal
Average Consumption17.8 km/lit
Standing 1/4 Mile10.8 sec
Top Speed251.2 km/h / 156 mph