Honda NSR150SP (1997)

The Honda NSR150SP Repsol Replica is a 1997 motorcycle that features a two-stroke, single-cylinder engine with a capacity of 149mm. The bike has a liquid cooling system and a compression ratio of either 6.5:1 or 6.8:1 depending on the model. It also has a 28mm Keihin induction system and electronic CDI ignition with an NKG B9ECS spark plug. The maximum power of the bike is 39.5 hp at 10,500 rpm, and the maximum torque is 2.74 kg-m at 9,000 rpm. The clutch is a wet multi-plate with coil springs, and the bike has a six-speed transmission and a final drive chain. The front suspension is a telescopic oil-filled damper, while the rear suspension can either be a Pro-Link or a Pro-Arm depending on the model. The front brakes are a single 298mm disc with a two-piston caliper, and the rear brakes are a single 220mm disc with a two-piston caliper. The bike has a 25-degree rake and a trail of 91mm, with dimensions of 1970 mm length, 685 mm width, and 1060 mm height. The wheelbase is 1355mm, seat height is 685mm, and the ground clearance is 142 kg dry weight with a fuel capacity of 10.5 liters.

Technical specifications:

Make Model: Honda NSR 150SP Repsol Replica

Year: 1997
Engine: Two stroke, single cylinder
Capacity: 149 mm /
Bore x Stroke: 59 x 54.5 mm
Cooling System: Liquid cooled
Compression Ratio: 6.5:1 (RR) 6.8:1 (RR-W)
Induction: 28mm Keihin
Ignition: Electronic CDI
Spark Plug: NKG B9ECS
Starting:
Max Power: 39.5 hp @ 10,500 rpm
Max Torque: 2.74 kg-m @ 9000 rpm
Clutch: Wet Multi Plate with Coil Springs
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic oil filled damper
Rear Suspension: Pro-Link (R) (RR/RR-W) or Pro-Arm (R) (SP)
Front Brakes: Single 298mm disc 2 piston caliper
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 90/80-17
Rear Tyre: 120/80-17 or 130/80-17
Rake: 25 degrees
Trail: 91mm
Dimensions: Length 1970 mm Width 685 mm Height 1060 mm
Wheelbase: 1355 mm
Seat Height: 685 mm
Ground Clearance: 142 kg
Dry Weight: 122.4 kg
Fuel Capacity: 10.5 Litres