Honda CB1000R (2010)

The 2010 Honda CB 1000R is a motorcycle powered by a four-stroke, transverse four-cylinder, DOHC, with 4 valves per cylinder. The bike has a capacity of 998cc / 60.9 cu-in, a bore x stroke of 75 x 56.5 mm, and a liquid-cooled cooling system. It has a compression ratio of 11.2:1 and uses PGM-F1 electronic fuel injection with 36mm throttle bodies for induction. It has a computer-controlled digital transistorized ignition and an electric starter, with max power of 123.4 hp / 92 kW @ 10000 rpm and max torque of 100 Nm / 73.8 ft-lb @ 8000 rpm. The bike uses wet, multiplate with coil springs clutch, and 6-speed transmission with #530 O-ring sealed chain final drive. The frame is a mono-back born coast aluminous and the front suspension is 43mm Inverted HMAS cartridge type telescopic forks, with stepless reload, compression, and rebound adjustable with 120mm / 4.7 in front wheel travel. The rear suspension is a monoshock with gas-charged HMAS damper rebound adjustable, and 128mm / 5.0 in rear wheel travel. The brakes consist of 2x 310mm discs with 3 piston calipers in the front and a single 256mm disc with a 2 piston caliper in the rear. The wheels are hollow-section 4-spoke cast aluminum in the front and U-section 4-spoke cast aluminum in the rear, with front and rear tires of 120/70 ZR17 and 180/50 ZR17. The bike has a 25.0-degree caster angle, 99.0mm / 3.9 in trail, 1445mm / 56.8 in wheelbase, and 828mm / 32.6 in seat height, and 130mm / 5.1 in ground clearance. The dry weight of the bike is 217kg / 478.4 lbs, and it has a fuel capacity of 17 liters / 4.5 gallons, with an average consumption of 18.3 km/lit. The bike can reach a standing 1/4 mile of 11.3 sec and a top speed of 228.6 km/h / 142.0 mph.

Technical specifications:

Make Model: Honda CB 1000R