Harley Davidson XL1200X Forty-Eight (2016-17)

The Harley Davidson XL1200X Forty-Eight model was produced from 2016-2017. It has a four-stroke, air-cooled Evolution engine with a capacity of 1202cc and a compression ratio of 10.0:1. The exhaust features shorty-dual blacked-out mufflers, and the bike uses electronic sequential port fuel injection for induction. The digital CDI ignition system is electrically started. The bike has a maximum torque of 96 Nm at 3500 rpm and a 5-speed transmission with a belt final drive. The frame is made from mild steel, with circular and cast sections, and the swingarm is also mild steel with rectangular tube sections. The bike has front forks with cartridge dampening technology and emulsion technology rear shocks with a range of pre-load adjustability. The bike has a single 300mm disc with two 38mm piston calipers for the front and rear brakes. The wheels are cast aluminum, 9 double-spoke, black with machined highlights, with a 130/90 B16 73H tire in the front and a 150/80 B16 77H in the rear. The rake is 29.6 degrees, and the trail is 132 mm. The bike is 2210 mm in length, has a wheelbase of 1495 mm, and a seat height of 710 mm. It weighs 252 kg and has a fuel capacity of 7.9 L.

Technical specifications:

Make Model: Harley Davidson XL 1200X Forty-Eight

Year: 2016 – 17
Engine: Evolution(R), four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1202 cc / 73.4 cu in.
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Exhaust: Shorty-dual exhaust with blacked out mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 96 Nm / 9.8 kgf-m / 70.8 ft/lbs./ @ 3500 rpm
Transmission: 5 Speed
Final Drive: Belt
Primary Drive Chain: 38/57 ratio
Gear Ratio: 1st 9.004 / 2nd 6.432 / 3rd 4.783 / 4th 3.965 / 5th 3.400:1
Frame: Mild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Suspension: Front forks with cartridge dampening technology
Rear Suspension: Emulsion technology rear shocks with 50 mm range of pre-load adjustability and an under-seat, rear shock suspension adjustment wrench
Front Brakes: Single 300mm disc, 2 x 38mm piston calipers
Rear Brakes: Single 300mm disc, 2 x 38mm piston calipers
Front Wheel: Cast aluminium, 9 double spoke, black, machined highlights
Rear Wheel: Cast aluminium, 9 double spoke, black, machined highlights
Front Tyre: 130/90 B16 73H
Rear Tyre: 150/80 B16 77H
Rake: 29.6 degrees
Trail: 132 mm / 5.2 in.
Dimensions: Length 2210 mm / 87.0 in
Wheelbase: 1495 mm / 58.9 in.
Seat Height: Unladen 710 mm / 28.0 in.
Ground Clearance: 110 mm / 4.3 in
Lean Angle (Left): 27.1o
Lean Angle (Right): 27.1o
Wet Weight: 252 kg / 556 lbs
Oil Capacity: 2.6 L / 0.69 US gal
Fuel Capacity: 7.9 L / 2.1 US gal