MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson XL 883L Sportster Super Low (2018-19)

Entry updated

Harley Davidson XL 883L Sportster Super Low (2018-19)

At a glance

Capacity
883 cc / 53.9 cub in.
Power
50.2 kW / 68 hp @ 4400 rpm
Torque
73 Nm / 7.4 kgf-m / 53.8 ft/lb @ 3750 rpm

The full picture.

The Harley Davidson XL 883L Sportster SuperLow is a 2018-19 model motorcycle with a four-stroke OHV V-Twin engine and a capacity of 883 cc. It has a compression ratio of 9.0:1 and features electronic sequential port fuel injection and digital CDI ignition. The motorcycle has a maximum power of 50.2 kW / 68 hp at 4400 rpm and a maximum torque of 73 Nm / 7.4 kgf-m / 53.8 ft/lb at 3750 rpm. It has a chain primary drive and a belt final drive, with gear ratios of 1st 10.407 / 2nd 7.436 / 3rd 5.53 / 4th 4.583 / 5th 3.93:1.

The frame of the bike is made from mild steel with tubular and circular sections and cast junctions, while the swing arm is made from mild steel with rectangular tube sections and stamped junctions. It has a lean angle of 24.4o (left) and 24.7o (right). The front suspension consists of 39mm telescopic forks with 104mm of wheel travel, while the rear suspension is a coil-over with dual-adjustable preload and 64mm of wheel travel. The front brakes are a single 300mm disc with 2 x 38mm piston calipers.


Technical specifications:

Make Model: Harley Davidson XL 883L Sportster SuperLow

Motorcycle technical specifications
Year2018 – 19
EngineFour stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity883 cc / 53.9 cub in.
Bore x Stroke76.2 x 96.8 mm
Cooling SystemAir cooled
Compression Ratio9.0:1
ExhaustChrome, staggered, shorty exhaust with dual mufflers
InductionElectronic Sequential Port Fuel Injection
IgnitionDigital CDI
StartingElectric
Max Power50.2 kW / 68 hp @ 4400 rpm
Max Torque73 Nm / 7.4 kgf-m / 53.8 ft/lb @ 3750 rpm
ClutchMulti-plate clutch with diaphragm spring in oil bath
Transmission5 Speed
Primary DriveChain, 34/57
Final DriveBelt
Gear Ratio1st 10.407 / 2nd 7.436 / 3rd 5.53 / 4th 4.583 / 5th 3.93:1
FrameMild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Lean Angle, Left24.4o
Lean Angle, Right24.7o
Front Suspension39 mm Telescopic forks
Front Wheel Travel104 mm / 4.09 in
Rear SuspensionCoil-over, dual-adjustable preload
Rear Wheel Travel64 mm / 2.5 in
Front BrakesSingle 300 mm disc, 2 x 38mm piston calipers