Categories: Harley-Davidson

Harley Davidson XL 883L Sportster Super Low (2016-17)

The Harley Davidson XL 883L Sportster SuperLow motorcycle model was produced in 2016-17 with a four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder engine and a 883 cc / 53.9 cub in capacity. It has a chrome, staggered, shorty exhaust with dual mufflers and electronic sequential port fuel injection for induction. The maximum power output is 50.2 kW / 68 hp at 4400 rpm with a maximum torque of 73 Nm / 7.4 kgf-m / 53.8 ft/lb at 3750 rpm. The motorcycle features a multi-plate clutch with diaphragm spring in oil bath and a 5 speed transmission with chain, 34/57 primary drive and belt final drive. The frame is made of mild steel with tubular frame and circular sections, cast junctions and swingarm is mild steel, rectangular tube sections, stamped junctions, MIG welded. It has a left lean angle of 24.4o and a right lean angle of 24.7o. The front suspension consists of 39 mm telescopic forks with front wheel travel of 104 mm / 4.09 in and rear suspension features a coil-over, dual-adjustable preload with rear wheel travel of 64 mm / 2.5 in. The front brakes consist of a single 300 mm disc and 2 x 38mm piston calipers.


Technical specifications:

Make Model: Harley Davidson XL 883L Sportster SuperLow

Year: 2016 – 17

Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.

Capacity: 883 cc / 53.9 cub in.



Bore x Stroke: 76.2 x 96.8 mm

Cooling System: Air cooled

Compression Ratio: 9.0:1

Exhaust: Chrome, staggered, shorty exhaust with dual mufflers

Induction: Electronic Sequential Port Fuel Injection

Ignition: Digital CDI

Starting: Electric

Max Power: 50.2 kW / 68 hp @ 4400 rpm

Max Torque: 73 Nm / 7.4 kgf-m / 53.8 ft/lb @ 3750 rpm

Clutch: Multi-plate clutch with diaphragm spring in oil bath

Transmission: 5 Speed

Primary Drive: Chain, 34/57

Final Drive: Belt


Gear Ratio: 1st 10.407 / 2nd 7.436 / 3rd 5.53 / 4th 4.583 / 5th 3.93:1

Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded

Lean Angle, Left: 24.4o

Lean Angle, Right: 24.7o

Front Suspension: 39 mm Telescopic forks

Front Wheel Travel: 104 mm / 4.09 in

Rear Suspension: Coil-over, dual-adjustable preload

Rear Wheel Travel: 64 mm / 2.5 in

Front Brakes: Single 300 mm disc, 2 x 38mm piston calipers
admin

Recent Posts

Moto Guzzi V7 750 Sport Verde Legnano (1971)

Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…

7 months ago

Moto Guzzi V9 Roamer (2016-17)

Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…

7 months ago

Honda XL 600V Transalp (1996)

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…

1 year ago

Yamaha FZ250 (1985)

The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…

1 year ago

Roehr eSuperBike / RR (2009)

The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…

1 year ago

BSA A65R (1964-72)

The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…

1 year ago