MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson XL 1200V Seventy Two (2012-13)

Entry updated

Harley Davidson XL 1200V Seventy Two (2012-13)

At a glance

Capacity
1199 cc / 73.2 cub in.
Torque
79 ft/lbs / 107 Nm @ 3500 rpm
Seat height
Laden2 675 mm / 26.6 in. Unladen 710 mm / 28.0 in.

The full picture.

The Harley Davidson XL 1200V Seventy Two motorcycle was produced from 2012-2013. The engine is a 1199cc, four-stroke V-twin with 2 valves per cylinder and air cooling. It has a 9.7:1 compression ratio and an electronic sequential port fuel injection system. The bike has a maximum torque of 79 ft/lbs at 3500 rpm and is equipped with a 5-speed transmission and belt final drive. The frame is made of mild steel tubing, and the front suspension consists of 39mm forks, while the rear suspension is a coil-over setup with dual-adjustable preload. Braking power comes from a single 292mm disc with a two-piston caliper in the front and a single 292mm disc with a one-piston caliper in the rear. Both wheels are steel laced, and the front tire size is MH90-21, while the rear is 150/80B16. The motorcycle weighs 555 lbs when wet and has a ground clearance of 5.3 inches. It has a fuel capacity of 2.1 US gal and an oil capacity of 2.6 liters. Overall, the Harley Davidson XL 1200V Seventy Two is a vintage-inspired motorcycle with a unique design and notable power.


Technical specifications:

Make Model: Harley Davidson XL 1200V Seventy Two

Motorcycle technical specifications
Year2012 – 13
EngineFour stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity1199 cc / 73.2 cub in.
Bore x Stroke88.8 x 96.8 mm
Cooling SystemAir cooled,
Compression Ratio9.7:1
ExhaustChrome, staggered shorty exhaust with dual slash-cut mufflers
InductionElectronic Sequential Port Fuel Injection (ESPFI)
IgnitionDigital CDI
StartingElectric
Max Torque79 ft/lbs / 107 Nm @ 3500 rpm
Transmission5 Speed
Final DriveBelt
Primary Drive Chain38/57 ratio
Gear Ratio1st 9.315 2nd 6.653 3rd 4.948 4th 4.102 5th 3.517
FrameMild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube section, stamped junctions; MIG welded
Front Suspension39mm Forks
Rear SuspensionCoil-over, dual-adjustable preload
Front BrakesSingle 292mm disc 2 piston caliper
Rear BrakesSingle 292mm disc 1 piston calipers
Front WheelSteel Laced
Rear WheelSteel Laced
Front TyreD402F MH90-21 54H
Rear TyreD401 150/80B16 71H
Rake30 degrees
Trail125 mm / 4.9 in
DimensionsLength 2275 mm / 89.5 in
Wheelbase1525 / 60.0 in
Seat HeightLaden2 675 mm / 26.6 in. Unladen 710 mm / 28.0 in.
Wet Weight251.7 kg / 555 lbs
Gross Vehicle Weight Rating453.6 kg / 1000 lbs
Ground Clearance135 mm / 5.3 in
Oil Capacity2.6 Litres
Fuel Capacity13.7 Litres / 2.1 US gal