Harley Davidson FXDF Dyna Fat Bob (2016-17)

The Harley Davidson Dyna Fat Bob motorcycle year models 2016-2017 has a V-twin, twin cam 103 c engine with an integrated oil cooler and a capacity of 1690 cc/103 cu. in. It is air cooled with a compression ratio of 9.6:1 and electronic sequential port fuel injection. The ignition is single-fire, non-wasted, and map-controlled spark ignition that starts electrically. The motorcycle has a maximum torque of 132 Nm/13.5 kgf-m/98.0 ft/lbs at 3250 rpm with a multi-plate, wet clutch and 6-speed transmission. The primary drive is a chain with a 34/46 final drive belt and a gear ratio of 1s 9.311/2nd 6.454/3rd 4.793/4th 3.882/5th 3.307/6th 2.790:1. The frame is a mild steel, tubular frame with a rectangular section backbone, stamped, cast and forged junctions, forged fender supports, and MIG welded. The motorcycle has a lean angle of 31 degrees to the left and 30 degrees to the right. The front suspension is 49mm with polished aluminum fork triple clamp and dual-rate springs with a front wheel travel of 127 mm/4.9 in. The rear suspension is coil over shock with a rear wheel travel of 54 mm/2.1 in. The front brake is a single 300mm disc with a 4 piston fixed caliper, and the rear brake is a single 292mm disc with a 2 piston torque-free floating caliper. The wheels are front and rear, glossy black cast aluminum with laser-etched graphics, and the front tire is 130/90B16 67, while the rear tire is 180/70B16 77H. The rake is 29 degrees with a trail of 125 mm/4.9 in. The dimensions are length 2400 mm/94.5 in, with a wheelbase of 1620 mm/63.8 in. The seat height is unladen at 690 mm/27.2 in, with a ground clearance of 125 mm/4.9 in. The gross vehicle weight rating is 492 kg/1085 lbs, and the dry weight is 306 kg/675 lbs, with a wet weight of 321 kg/708 lbs. The oil capacity is 2.8 liters/3.0 US qt, and the fuel capacity is 18.9 liters/5.0 US gal with an average consumption of 5.6 L/100 km/17.9 km/l/42 US mpg.

Technical specifications:

Make Model: Harley Davidson Dyna Fat Bob