Harley Davidson FXD-SE Screamin’ Eagle Dyna CVO (2007-08)

The Harley Davidson FXD-SE Screamin’ Eagle Dyna CVO (2007-08) motorcycle has a four-stroke, Twin Cam 110 c engine with pushrod-operated valves and hydraulic self-adjusting lifters. It has a capacity of 1804 cc and a compression ratio of 9.15:1. The bike is equipped with electronic sequential port fuel injection (ESPFI) and single-fire, non-wasted, map-controlled spark ignition. It has a maximum torque of 142.3 Nm / 105 ft-lb @ 3000 rpm and a six-speed transmission with a belt final drive. The bike features a mild steel tubular frame, 43 mm inverted front forks, and progressive rate springs on the rear suspension. It also has single disc, four-piston caliper brakes on both the front and rear, and D402F MH90-21 front and D407 170/60R17 78H rear tires. The bike has a rake of 29 degrees, a trail of 132 mm / 5.2 in, and a ground clearance of 117 mm / 4.6 in. It has a dry weight of 307 kg / 678 lbs and a fuel capacity of 17.7 Liters / 4.7 US gal.

Technical specifications:

Make Model: Harley Davidson FXD-SE Screamin’ Eagle Dyna CVO

Year: 2007 – 08
Engine: Four stroke, Twin Cam 110 c Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Capacity: 1804 cc / 110.1 cub in.
Bore x Stroke: 101.6 x 111.3 mm
Cooling System: Air cooled
Compression Ratio: 9.15:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 142.3 Nm / 105 ft-lb @ 3000 rpm
Clutch: Hydraulically actuated, 9-plate, wet, with high performance spring
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.312 9.312 2nd 6.421 6.421 3rd 4.774 4.774 4th 3.926 3.926 5th 3.279 3.279 6th 2.790 2.790
Frame: Mild steel tubular frame; rectangular section backbone; stamped, cast and forged junctions; forged fender supports; MIG welded; color-matched to vehicle Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded; color-matched to the vehicle
Front Suspension: 43 mm inverted forks; chrome fork tubes and triple clamps, 150mm wheel travel
Rear Suspension: Lowered with progressive rate springs; full chrome covers with hand-adjustable pre-load, 47mm wheel travel
Front Brakes: Single disc 4 piston caliper
Rear Brakes: Single disc 4 piston caliper
Front Tyre: D402F MH90-21
Rear Tyre: D407 170/60R17 78H
Rake: 29 degrees
Fork Angle: 29 degrees
Trail: 132 mm / 5.2 in
Dimensions: Length 2346.4 mm / 92.3 in Width 940.56 mm / 37.03 in Height 1158.75 mm / 45.6 in
Wheelbase: 1630.6 ,, 64.2 in
Seat Height: Laden2 695.9 mm / 26.5 in Unladen 673 mm / 27.4 in
Ground Clearance: 117 mm / 4.6 in
Dry Weight: 307 kg / 678 lbs
Wet Weight: 317 kg / 698 lbs
Fuel Capacity: 17 7 Litres / 4.7 US gal