MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson FXD-SE Screamin’ Eagle Dyna CVO (2007-08)

Entry updated

At a glance

Capacity
1804 cc / 110.1 cub in.
Torque
142.3 Nm / 105 ft-lb @ 3000 rpm
Seat height
Laden2 695.9 mm / 26.5 in Unladen 673 mm / 27.4 in

The full picture.

The Harley Davidson FXD-SE Screamin’ Eagle Dyna CVO (2007-08) motorcycle has a four-stroke, Twin Cam 110 c engine with pushrod-operated valves and hydraulic self-adjusting lifters. It has a capacity of 1804 cc and a compression ratio of 9.15:1. The bike is equipped with electronic sequential port fuel injection (ESPFI) and single-fire, non-wasted, map-controlled spark ignition. It has a maximum torque of 142.3 Nm / 105 ft-lb @ 3000 rpm and a six-speed transmission with a belt final drive. The bike features a mild steel tubular frame, 43 mm inverted front forks, and progressive rate springs on the rear suspension. It also has single disc, four-piston caliper brakes on both the front and rear, and D402F MH90-21 front and D407 170/60R17 78H rear tires. The bike has a rake of 29 degrees, a trail of 132 mm / 5.2 in, and a ground clearance of 117 mm / 4.6 in. It has a dry weight of 307 kg / 678 lbs and a fuel capacity of 17.7 Liters / 4.7 US gal.


Technical specifications:

Make Model: Harley Davidson FXD-SE Screamin’ Eagle Dyna CVO

Motorcycle technical specifications
Year2007 – 08
EngineFour stroke, Twin Cam 110 c Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Capacity1804 cc / 110.1 cub in.
Bore x Stroke101.6 x 111.3 mm
Cooling SystemAir cooled
Compression Ratio9.15:1
InductionElectronic Sequential Port Fuel Injection (ESPFI)
IgnitionSingle-fire, non-wasted, map-controlled spark ignition
StartingElectric
Max Torque142.3 Nm / 105 ft-lb @ 3000 rpm
ClutchHydraulically actuated, 9-plate, wet, with high performance spring
Transmission6 Speed
Final DriveBelt
Gear Ratio1st 9.312 9.312 2nd 6.421 6.421 3rd 4.774 4.774 4th 3.926 3.926 5th 3.279 3.279 6th 2.790 2.790
FrameMild steel tubular frame; rectangular section backbone; stamped, cast and forged junctions; forged fender supports; MIG welded; color-matched to vehicle Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded; color-matched to the vehicle
Front Suspension43 mm inverted forks; chrome fork tubes and triple clamps, 150mm wheel travel
Rear SuspensionLowered with progressive rate springs; full chrome covers with hand-adjustable pre-load, 47mm wheel travel
Front BrakesSingle disc 4 piston caliper
Rear BrakesSingle disc 4 piston caliper
Front TyreD402F MH90-21
Rear TyreD407 170/60R17 78H
Rake29 degrees
Fork Angle29 degrees
Trail132 mm / 5.2 in
DimensionsLength 2346.4 mm / 92.3 in Width 940.56 mm / 37.03 in Height 1158.75 mm / 45.6 in
Wheelbase1630.6 ,, 64.2 in
Seat HeightLaden2 695.9 mm / 26.5 in Unladen 673 mm / 27.4 in
Ground Clearance117 mm / 4.6 in
Dry Weight307 kg / 678 lbs
Wet Weight317 kg / 698 lbs
Fuel Capacity17 7 Litres / 4.7 US gal