The Harley Davidson FLTRX-SE Road Glide Custom CVO is a motorcycle with a four stroke, Twin Cam 110 engine and a capacity of 1804 cc. It is air cooled and has a compression ratio of 9.15:1. The bike has electronic sequential port fuel injection (ESPFI) and single-fire, non-wasted, map-controlled spark ignition for the ignition system. The clutch is hydraulically actuated, 9-plate, wet, with high performance spring and it has a 6-speed transmission with a belt final drive. The front suspension is 41.3 mm telescopic, triple circuit damping, while the rear suspension is air-adjustable with a swingarm. The bike has front and rear brakes, with 2x 300mm discs and a single 300mm disc respectively. The front tyre is 130/70B18 while the rear tyre is 180/55B18. The dimensions of the Harley Davidson FLTRX-SE Road Glide Custom CVO are 2443mm in length, 909mm in width and 1340mm in height, with a seat height of 676mm when laden and 699mm when unladen. The gross axle weight rating is 616.8kg and the wet weight is 383.2kg. The oil capacity is 3.8 litres and the fuel capacity is 22.7 litres.
Make Model: Harley Davidson FLTRX-SE Road Glide Custom CVO
Year: 2012
Engine: Four stroke, Twin Cam 110 c Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Capacity: 1804 cc / 110.1 cub in.
Bore x Stroke: 101.6 x 111.3 mm
Cooling System: Air cooled
Compression Ratio: 9.15:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 165 Nm / 122 lb-ft @ 3750 rpm
Clutch: Hydraulically actuated, 9-plate, wet, with high performance spring
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.593 / 2nd 6.650 / 3rd 4.938 / 4th 4.000 / 5th 3.407 / 6th 2.875
Frame: Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded
Front Suspension: 41.3 mm telescopic, triple circuit damping
Rear Suspension: Air-adjustable, Swingarm Mild steel; two-piece drawn and welded section; forged juctions; MIG welded
Front Brakes: 2x 300mm discs 4 piston calipers
Rear Brakes: Single 300mm discs 4 piston caliper
Front Tyre: 130/70B18
Rear Tyre: 180/55B18
Rake / Trail: 26 degrees / 170 mm
Dimensions: Length 2443 mm / 96.2 in Width 909 mm / 35.8 in. Height 1340 mm / 52.8 in
Seat Height: Laden2 676 mm / 26.6 in Unladen 699 mm / 27.5 in
Gross Axle Weight Rating:: 616.8 kg / 1360 lbs
Wet Weight: 383.2 kg / 845 lbs
Oil Capacit: 3.8 Litres
Fuel Capacity: 22.7 Litres / 6 gal
Husqvarna's 2027 FC 250 uses a 249.9 cc engine. The published engine layout is 1-cylinder,…
For the 2027 KTM 125 XC-W, the manufacturer's technical sheet lists a 124.8 cc engine.…
The 2026 Triumph Speed Twin 1200 Cafe Racer Edition has a manufacturer-listed displacement of 1200…
Kawasaki's 2027 KLX140R uses a 144 cc engine. The published engine layout is air-cooled, 4-stroke,…
For the 2027 Suzuki DR-Z4SM, the manufacturer's technical sheet lists a 398 cc engine. The…
The 2027 Yamaha TT-R110E has a manufacturer-listed displacement of 110 cc. Its engine specification is…