Harley Davidson FLTRX Road Glidel 2017 (2019)

The Harley Davidson FLTRX Road Glide 2019 motorcycle has a four stroke, V-Twin Milwaukee-Eight 107 engine with a capacity of 1746 cc and an air-cooled cooling system. It has a chrome dual exhaust with 4 in. touring mufflers and touring muffler shields and an electronic sequential port fuel injection system. The bike has a hydraulically actuated clutch and a 6-speed cruise drive transmission with a belt final drive and a chain primary drive. Its frame is made of mild steel, and its swingarm is a two-piece drawn and welded section. It has a low air-adjustable low profile air ride rear suspension and front and rear disc brakes with 4 piston calipers. The front wheel is an Enforcer Cast Aluminum 19 inches by 3.5 inches. The bike has a maximum torque of 154 Nm at 3250 rpm and lean angles of 31 degrees to the left and 32 degrees to the right.

---

Technical specifications:

Make Model: Harley Davidson FLTRX Road Glide

Year: 2019

Engine: Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder

Capacity: 1746 cc / 107 cub in.

Bore x Stroke: 100 x 111 mm

Cooling System: Air cooled

Compression Ratio: 10.0:1

Exhaust: Chrome dual exhaust with 4 in. touring mufflers and touring muffler shields

Induction: Electronic Sequential Port Fuel Injection (ESPFI)

Lubrication: Pressurized, dry-sump with oil cooler

Ignition: Single-fire, non-wasted, map-controlled spark ignition

Starting: Electric

Max Torque: 154 Nm / 113.6 lb-ft @ 3250 rpm

Clutch: Hydraulically actuated, 9 plate wet, with high performance spring

Transmission: 6 Speed Cruise Drive (R)

Final Drive: Belt, 32/68 ratio

Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4.0 5th 3.407 6th 2.875

Primary Drive: Chain, 34/46 ratio

Frame: Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded

Lean Angle, Left: 31o

Lean Angle, Right: 32o

Front Suspension: 41.3 mm telescopic, triple circuit damping

Rear Suspension: Low air-adjustable low profile air ride rear suspension

Front Brakes: 2x 300mm discs 4 piston calipers

Rear Brakes: Single 300mm discs 4 piston caliper

Front Wheel: Enforcer Cast Aluminum 19 in. x 3.5 in.