MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson FLTRX Road Glidel 2017 (2019)

Entry updated

Harley Davidson FLTRX Road Glidel 2017 (2019)

At a glance

Capacity
1746 cc / 107 cub in.
Torque
154 Nm / 113.6 lb-ft @ 3250 rpm

The full picture.

The Harley Davidson FLTRX Road Glide 2019 motorcycle has a four stroke, V-Twin Milwaukee-Eight 107 engine with a capacity of 1746 cc and an air-cooled cooling system. It has a chrome dual exhaust with 4 in. touring mufflers and touring muffler shields and an electronic sequential port fuel injection system. The bike has a hydraulically actuated clutch and a 6-speed cruise drive transmission with a belt final drive and a chain primary drive. Its frame is made of mild steel, and its swingarm is a two-piece drawn and welded section. It has a low air-adjustable low profile air ride rear suspension and front and rear disc brakes with 4 piston calipers. The front wheel is an Enforcer Cast Aluminum 19 inches by 3.5 inches. The bike has a maximum torque of 154 Nm at 3250 rpm and lean angles of 31 degrees to the left and 32 degrees to the right.


Technical specifications:

Make Model: Harley Davidson FLTRX Road Glide

Motorcycle technical specifications
Year2019
EngineFour stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity1746 cc / 107 cub in.
Bore x Stroke100 x 111 mm
Cooling SystemAir cooled
Compression Ratio10.0:1
ExhaustChrome dual exhaust with 4 in. touring mufflers and touring muffler shields
InductionElectronic Sequential Port Fuel Injection (ESPFI)
LubricationPressurized, dry-sump with oil cooler
IgnitionSingle-fire, non-wasted, map-controlled spark ignition
StartingElectric
Max Torque154 Nm / 113.6 lb-ft @ 3250 rpm
ClutchHydraulically actuated, 9 plate wet, with high performance spring
Transmission6 Speed Cruise Drive (R)
Final DriveBelt, 32/68 ratio
Gear Ratio1st 9.593 2nd 6.65 3rd 4.938 4th 4.0 5th 3.407 6th 2.875
Primary DriveChain, 34/46 ratio
FrameMild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded
Lean Angle, Left31o
Lean Angle, Right32o
Front Suspension41.3 mm telescopic, triple circuit damping
Rear SuspensionLow air-adjustable low profile air ride rear suspension
Front Brakes2x 300mm discs 4 piston calipers
Rear BrakesSingle 300mm discs 4 piston caliper
Front WheelEnforcer Cast Aluminum 19 in. x 3.5 in.