Harley Davidson FLSTSB Softail Cross Bones (2008-09)

The Harley Davidson FLSTSB Softail Cross Bones is a four-stroke, V-twin, Twin Cam 96 motorcycle with a capacity of 1584cc. It has an air-cooled cooling system, electronic sequential port fuel injection, and a single-fire, non-wasted, map-controlled spark ignition. The bike has a six-speed transmission with a multi-plate clutch and a belt final drive. The exhaust is chrome with straight over/under shotgun, slash-cut dual mufflers. The bike has a mild steel tubular frame with a rectangular section backbone and forged fender supports. The front suspension is a black leading link fork for Springer, and the rear suspension is a mild steel swingarm. The bike has a single 292mm disc 2 piston caliper for both front and rear brakes. The front tire is MT90 B16, and the rear tire is 200/55 R17. It has a rake of 32 degrees, a fork angle of 24.2 degrees, and a trail of 160mm. The bike has a length of 2298.70mm, a width of 967.74mm, and a height of 1255mm. The seat height is laden 676.3mm unladen 766.8mm, and the ground clearance is 124mm. The dry weight is 317.5kg, and the wet weight is 334kg, with a fuel capacity of 18.9 liters.

Technical specifications:

Make Model: Harley Davidson FLSTSB Softail Cross Bones

Year: 2008 – 09
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.2 x 111.2 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starring: Electric
Max Torque: 124.7 Nm / 92 ft. lbs @ 3000 rpm
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.790
Clutch: Multi-plate with diaphragm spring in oil bath
Exhaust: Chrome, straight over / under shotgun, slash-cut with dual mufflers
Frame: Mild steel tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded
Front Suspension: Front Forks Black leading link for Springer (R) model
Rear Suspension: Swingarm Mild steel, round tube sections, forged junctions; MIG welded
Front Brakes: Single 292mm disc 2 piston caliper, Rear Shocks Hidden, horizontal-mounted, coil-over
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: MT90 B16
Rear Tyre: 200/55 R17
Rake: 32 degrees
Fork Angle: 24.2 degrees
Trail: 160 mm / 6.3 in
Dimensions: Length 2298.70 mm / 90.50 in Width 967.74 mm / 38.10 in Height 1255 mm / 52.6 in
Wheelbase: 1638 mm / 64.5 in
Seat Height: Laden 676.3 mm Unladen 766.8 mm
Ground Clearance: 124 mm / 4.9 in
Dry-Weight: 317.5 kg / 700 lbs
Wet Weight: 334 kg / 737 lbs
Fuel Capacity: 18.9 Litres / 5.0 US gal