Harley Davidson FLSTS Heritage Springer Classic (2010-11)

The Harley Davidson FLSTS Heritage Springer Classic motorcycle from 2010-11 has a four stroke, 45-degree V-Twin engine of 1584 cc/96 cu-in with pushrod-operated overhead valves and electronic sequential port fuel injection. It has a compression ratio of 9.2:1, and the maximum torque is 124.7 Nm/92 ft. lbs at 3000 rpm. The bike features a 6-speed transmission and a belt for final drive. The mild steel tubular frame of the motorcycle has stamped, cast, and forged junctions and forged fender supports, while the suspension includes a black leading link for the Springer(R) model in the front and a mild steel, round tube swingarm at the rear. The bike has 292mm disc brakes with two-piston calipers both front and rear, and a ground clearance of 124mm/4.9in. The fuel capacity of the bike is 18.9 litres/5.0 US gal, and its dry weight is 317.5 kg/700 lbs, while wet weight is 334 kg/737 lbs. The dimensions of the bike are length – 2298.70mm/90.50in, width – 967.74mm/38.10in, height – 1255mm/52.6in, wheelbase – 1638mm/64.5in, and seat height – 766.8mm when unladen and 676.3mm when laden.

---

Technical specifications:

Make Model: Harley Davidson FLSTSB Softail Cross Bones

Year: 2010 – 11

Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder

Capacity: 1584 cc / 96 cu-in

Bore x Stroke: 95.2 x 111.2 mm

Cooling System: Air cooled

Compression Ratio: 9.2:1

Induction: Electronic Sequential Port Fuel Injection (ESPFI)

Ignition: Single-fire, non-wasted, map-controlled spark ignition

Starring: Electric

Max Torque: 124.7 Nm / 92 ft. lbs @ 3000 rpm

Transmission: 6 Speed

Final Drive: Belt

Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.790

Clutch: Multi-plate with diaphragm spring in oil bath

Exhaust: Chrome, straight over / under shotgun, slash-cut with dual mufflers

Frame: Mild steel tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded

Front Suspension: Front Forks Black leading link for Springer (R) model

Rear Suspension: Swingarm Mild steel, round tube sections, forged junctions; MIG welded

Front Brakes: Single 292mm disc 2 piston caliper, Rear Shocks Hidden, horizontal-mounted, coil-over

Rear Brakes: Single 292mm disc 2 piston caliper

Front Tyre: MT90 B16

Rear Tyre: 200/55 R17

Rake: 32 degrees

Fork Angle: 24.2 degrees

Trail: 160 mm / 6.3 in

Dimensions: Length 2298.70 mm / 90.50 in Width 967.74 mm / 38.10 in Height 1255 mm / 52.6 in

Wheelbase: 1638 mm / 64.5 in

Seat Height: Laden 676.3 mm Unladen 766.8 mm

Ground Clearance: 124 mm / 4.9 in

Dry-Weight: 317.5 kg / 700 lbs

Wet Weight: 334 kg / 737 lbs

Fuel Capacity: 18.9 Litres / 5.0 US gal