Categories: Harley-Davidson

Harley Davidson FLS Softail Slim (2016-17)

The Harley Davidson FLS Softail Slim is a 2016-17 model motorcycle with a four-stroke, Twin Cam 103B engine with pushrod-operated valves and hydraulic, self-adjusting lifters. It has a capacity of 1690 cc and a compression ratio of 9.6:1. The motorcycle has electronic sequential port fuel injection for induction and electronic ignition with electric starting. It has a maximum torque of 132 Nm at 3250 rpm and a six-speed transmission with a belt final drive and chain primary drive. The frame is made of mild steel tubular with a rectangular section backbone, and the swingarm is made of mild steel round tube sections with forged junctions. The motorcycle has front and rear suspension with single discs and two or four-piston calipers. It has black laced steel wheels with MT90B16 72H and MU85B16 77H tires. The motorcycle has a 32-degree rake and 147 mm trail length, and its wheelbase is 1635 mm with a ground clearance of 115 mm. The laden seat height is 605 mm, and the unladen seat height is 658 mm. The dry weight is 308 kg, and the wet weight is 321 kg with a gross vehicle weight rating of 526.0 kg. The fuel capacity is 18.9 litres, and the oil capacity is 3.3 litres.


Technical specifications:

Make Model: Harley Davidson FLS Softail Slim

Year: 2016 – 17
Engine: Four stroke, Twin Cam 103B Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Capacity: 1690 cc / 103.1 cub in.
Bore x Stroke: 98.4 x 111.1 mm
Cooling System: Air-cooled
Compression Ratio: 9.6:1
Exhaust: Chrome, over/under shotgun exhaust with slash-cut mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Electronic
Starting: Electric
Max Torque: 132 Nm / 13.5 kgf-m / 97.4 ft/lb @ 3250 rpm
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio
Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.79:1
Frame: Frame Mild steel tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded Swingarm Mild steel, round tube sections, forged junctions; MIG welded
Lean Angle, Left: 24o
Lean Angle, Right: 24.9o
Front Suspension: 41.3 mm telescopic, beer can covers
Rear Suspension: Hidden, horizontal-mounted, coil-over
Front Brakes: Single 292 mm discs, 4 piston caliper
Rear Brakes: Single 292 mm disc, 2 piston caliper
Front Wheel: Black, Laced Steel
Rear Wheel: Black, Laced Steel
Front Tyre: MT90B16 72H
Rear Tyre: MU85B16 77H
Rake: 32 degrees
Trail: 147 mm / 5.8 in
Trail: Length 2350 mm / 92.5 in
Wheelbase: 1635 mm / 64.3 in
Seat Height: Laden 605 mm / 23.8 in. Unladen 658 mm / 25.9 in.
Ground Clearance: 115 mm / 4.5 in
Dry Weight: 308 kh / 679 lbs
Wet Weight: 321 kg / 708 lbs
Gross Vehicle Weight Rating: 526.0 kg / 1160 lbs.
Oil Capacity: 3.3 Litres / 3.5 US qt
Fuel Capacity: 18.9 Litres / 5.0 US gal

admin

Share
Published by
admin

Recent Posts

Moto Guzzi V7 750 Sport Verde Legnano (1971)

Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…

2 years ago

Moto Guzzi V9 Roamer (2016-17)

Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…

2 years ago

Honda XL 600V Transalp (1996)

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…

3 years ago

Yamaha FZ250 (1985)

The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…

3 years ago

Roehr eSuperBike / RR (2009)

The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…

3 years ago

BSA A65R (1964-72)

The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…

3 years ago