Categories: Harley-Davidson

Harley Davidson FLHTK Electra Glide Ultra Limited (2010)

The Harley Davidson FLHTK Electra Glide Ultra Limited is a 2010 motorcycle with a four-stroke, Twin Cam 103 c engine and an integrated oil cooler. It has pushrod-operated overhead valves with hydraulic, self-adjusting lifters and a capacity of 1690cc. The cooling system is air and liquid cooled, and compression ratio is 10.0:1. The bike has a 2-1-2 dual exhaust with tapered mufflers, and an electronic sequential port fuel injection system. It has single-fire, non-wasted, map-controlled spark ignition and a six-speed transmission with a belt final drive. The frame is made of mild steel, has a tubular frame, two-piece stamped and welded backbone, cast and forged junctions, and twin downtubes. The front suspension is a 41.3mm telescopic, triple-circuit damping system, and the rear suspension is air-adjustable. The bike has front and rear disc brakes with ABS, and contrast chrome impeller cast aluminum wheels. The gross vehicle weight rating is 616.9kg, and the wet weight is 414kg. The seat height is 695mm when laden and 740mm when unladen. The fuel capacity is 22.7 liters, and the motorcycle has a length of 2600mm and a wheelbase of 1625mm.


Technical specifications:

Make Model: Harley Davidson FLHTK Electra Glide Ultra Limited

Year: 2010

Engine: Four stroke, Twin Cam 103 c with integrated oil cooler Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder

Capacity: 1690 cc / 103.1 cub in.



Bore x Stroke: 98.4 x 111.25 mm

Cooling System: Air/Liquid cooled,

Compression Ratio: 10.0:1

Exhaust: Chrome, 2-1-2 dual exhaust with tappered mufflers

Induction: Electronic Sequential Port Fuel Injection (ESPFI)

Ignition: Single-fire, non-wasted, map-controlled spark ignition

Starting: Electric

Max Torque: 143 Nm / 105.4 ft/lb @ 3750 rpm

Clutch: Multi-plate, wet

Transmission: 6 Speed

Final Drive: Belt

Gear Ratio: 1st 9.593 / 2nd 6.650 / 3rd 4.938 / 4th 4.000 / 5th 3.407 / 6th 2.875

Frame: Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded


Front Suspension: 41.3 mm telescopic, triple-circuit damping,

Front Wheel Travel: 117 mm / 4.6 in

Rear Suspension: Air-adjustable

Rear Wheel Travel: 76 mm / 2.9 in

Front Brakes: 2x 300mm disc 4 piston caliper ABS

Rear Brakes: Single 300mm disc 4 piston caliper ABS

Wheels Front: Contrast Chrome Impeller Cast Aluminum

Wheels Rear: Contrast Chrome Impeller Cast Aluminum

Front Tyre: BW 130/80B17 65H

Rear Tyre: BW 180/65B16 81H


Rake: 26 degrees

Trail: 170 mm / 6.6 IN

Dimensions: Length 2600 mm / 102.4 in.

Wheelbase: 1625 mm / 64 in.

Seat Height: Laden 695 mm / 27.3 in Unladen 740 mm / 29.1 in

Gross Vehicle Weight Rating: 616.9 kg / 1360 lbs

Wet Weight: 414 kg / 896 lbs

Oil Capacity: 3.8 Litres / 4 qt.

Fuel Capacity: 22.7 Litres / 6.0 US gal
admin

Share
Published by
admin

Recent Posts

Moto Guzzi V7 750 Sport Verde Legnano (1971)

Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…

7 months ago

Moto Guzzi V9 Roamer (2016-17)

Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…

7 months ago

Honda XL 600V Transalp (1996)

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…

1 year ago

Yamaha FZ250 (1985)

The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…

1 year ago

Roehr eSuperBike / RR (2009)

The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…

1 year ago

BSA A65R (1964-72)

The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…

1 year ago