MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson FLHRSE5 Road King CVO 110th Anniversary (2013)

Entry updated

Harley Davidson FLHRSI Road King (2013)

At a glance

Capacity
1802 cc / 110 cu-in
Torque
156 Nm / 115 lb-ft @ 3000 rpm
Seat height
Laden2 673 mm / 26.5 in Unladen 711 mm / 28.0 in.

The full picture.

The Harley Davidson FLHR-SE5 Road King CVO 110th Anniversary Edition is a 2013 motorcycle that has a four-stroke, 45-degree V-twin Twin Cam 110 engine. It has a capacity of 1802 cc or 110 cubic inches, and its valves are pushrod-operated overhead valves with hydraulic self-adjusting lifters and two valves per cylinder. The motorcycle is air-cooled, has a pressurized, dry-sump lubrication system, and a 9.7:1 compression ratio. Its exhaust is chrome and has a 2-1-2 dual exhaust with tapered mufflers. The ignition is a single-fire, non-wasted, map-controlled spark ignition, and it has an electronic sequential port fuel injection (ESPFI) system for induction. The transmission is a six-speed with a belt final drive and chain primary drive with a ratio of 34/46. The motorcycle has a mild steel, square-section backbone frame with twin downtubes, and telescopic, cartridge-style damping for the front suspension. The rear suspension is a short, air-adjustable shock. The front brakes are 2x 292mm disc with 4 piston calipers, while the rear brake is a single 292mm disc with 4 piston caliper. The front wheel is black and chrome, with 28-spoke cast aluminum, while the rear wheel is the same. The front tire is 130/80B17 65H, and the rear tire is 180/65B16 81H. The rake is 26 degrees, and the trail is 170mm or 6.7 inches. The length of the motorcycle is 2465mm or 96.5 inches, and the wheelbase is 1625mm or 64 inches. The seat height is 673mm or 26.5 inches for laden and 711mm or 28.0 inches for unladen. It has a gross weight of 16.9kg or 1360 lbs and a dry weight of 355kg or 779 lbs. The fuel capacity is 22.7 litres or 6.0 gallons, and the oil capacity is 3.3 litres or 0.87 US gallons.


Technical specifications:

Make Model: Harley Davidson FLHR-SE5 Road King CVO 110th Anniversary Edition

Motorcycle technical specifications
Year2013
EngineFour stroke, 45 degrees V-Twin, Twin Cam 110 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity1802 cc / 110 cu-in
Bore x Stroke101.6 x 111.1 mm
Cooling SystemAir cooled
LubricationPressurized, dry-sump
Compression Ratio9.7:1
ExhaustChrome, 2-1-2 dual exhaust with tapered mufflers
InductionElectronic Sequential Port Fuel Injection (ESPFI)
IgnitionSingle-fire, non-wasted, map-controlled spark ignition
StarringElectric
Max Torque156 Nm / 115 lb-ft @ 3000 rpm
Transmission6 Speed
Final DriveBelt
Primary DriveChain, 34/46 ratio
Gear Ratio1st 9.593 2nd 6.65 3rd 4.938 4th 4.0 5th 3.407 6th 2.875
FrameMild steel, square-section backbone with twin downtubes
Front Suspension41.3 mm telescopic, cartridge-style damping
Rear SuspensionShort, air-adjustable shock
Front Brakes2x 292mm disc 4 piston caliper
Rear BrakesSingle 292mm disc 4 piston caliper
WheelsOptional Style Type Tubeless Chrome Aluminum Profile Laced
Front WheelBlack and Chrome, 28-spoke Cast Aluminum
Rear WheelBlack and Chrome, 28-spoke Cast Aluminum
Front Tyre130/80B17 65H
Rear Tyre180/65B16 81H
Rake26 degrees
Trail170 mm / 6.7 in
DimensionsLength 2465 mm / 96.5 in
Wheelbase1625 mm / 64 in
Seat HeightLaden2 673 mm / 26.5 in Unladen 711 mm / 28.0 in.
Gross Vehicle Weight Rating16.9 kg / 1360 lbs
Dry Weight355 kg / 779 lbs
Wet Weight368.3 kg / 812 lb
Ground Clearance145 mm / 5.7 in
Oil Capacity3.3 Litres / 0.87 US gal
Fuel Capacity22.7 Litres / 6.0 gal