The Harley Davidson FLH 1200 Electra Glide motorcycle was produced from 1965-69, featuring a Four-stroke, 45 degree V-Twin, OHV engine with a capacity of 1207 cc/74 cu-in. The engine had a compression ratio of 8.0:1, and used Tillotson 1-5/8″ dual Venturi diaphragm induction with an accelerator pump. The bike had a maximum power output of 58 hp/42.3 lb-ft at 5150 rpm and maximum torque of 70 lb-ft/95 Nm at 4000 rpm.
The FLH 1200 Electra Glide had a kick and electric starter, and was equipped with a 4-speed transmission with final drive by chain. Other features included Telescopic forks for the front suspension and a swinging fork for the rear, with drum brakes on the front and rear. The bike had a 5.10-16 tyre size on both the front and rear.
The wet weight of the FLH 1200 Electra Glide was 325 kg/716.5 lbs, and it had a fuel capacity of 16 liters/4.2 US gal. The bike was air-cooled and had a bore x stroke of 87.3 x 100.8 mm. The Ignition was alternator/battery, and the bike was known for its touring capabilities.
Technical specifications:
Make Model: Harley Davidson FLH 1200 Electra Glide
| Year | 1965 – 69 |
|---|---|
| Engine | Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder. |
| Capacity | 1207 cc / 74 cu-in |
| Bore x Stroke | 87.3 x 100.8 mm |
| Cooling System | Air cooled |
| Compression Ratio | 8.0:1 |
| Induction | Tillotson 1-5/8″ dual Venturi diaphragm w/accelerator pump |
| Ignition | Alternator/battery |
| Starting | Kick & electric |
| Max Power | 58 hp / 42.3 lb-ft @ 5150 rpm |
| Max Torque | 70 lb-ft / 95 Nm @ 4000 rpm |
| Transmission | 4 Speed |
| Final Drive | Chain |
| Front Suspension | Telescopic forks |
| Rear Suspension | Swinging fork. |
| Front Brakes | Drum |
| Rear Brakes | Drum |
| Front Tyre | 5.10-16 |
| Rear Tyre | 5.10-16 |
| Wet Weight | 325 kg / 716.5 lbs |
| Fuel Capacity | 16 Litres / 4.2 US gal |
