MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson FL 1200 Electra Glide (1973)

Entry updated

Harley Davidson FL 1200 Electra Glide (1973)

At a glance

Capacity
1207 cc / 74 cu-in
Power
58 hp / 42.3 lb-ft @ 5150 rpm
Torque
70 lb-ft / 95 Nm @ 4000 rpm

The full picture.

The Harley Davidson FLH 1200 Electra Glide is a motorcycle model produced in 1973. It has a four-stroke, 45 degree V-Twin engine with a capacity of 1207cc and a compression ratio of 8.0:1. The bike is air-cooled and has a Tillotson 1-5/8″ dual Venturi diaphragm with accelerator pump for its fuel induction. It uses an alternator/battery ignition system and can be started with an electric starter. The bike has a maximum power of 58 horsepower and a torque of 70 lb-ft at 4000 rpm. It has a four-speed transmission and a chain final drive. The front suspension is telescopic forks, while the rear suspension is a swinging fork. The bike has single 254mm disc brakes on both the front and rear wheels. The front and rear tires are both 5.10-16 in size, and the bike has a wet weight of 340kg (749.6 lbs) and a fuel capacity of 19 litres (5.0 US gal).


Technical specifications:

Make Model: Harley Davidson FLH 1200 Electra Glide

Motorcycle technical specifications
Year1973
EngineFour stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity1207 cc / 74 cu-in
Bore x Stroke87.3 x 100.8 mm
Cooling SystemAir cooled
Compression Ratio8.0:1
InductionTillotson 1-5/8″ dual Venturi diaphragm w/accelerator pump
IgnitionAlternator/battery
StartingElectric
Max Power58 hp / 42.3 lb-ft @ 5150 rpm
Max Torque70 lb-ft / 95 Nm @ 4000 rpm
Transmission4 Speed
Final DriveChain
Front SuspensionTelescopic forks
Rear SuspensionSwinging fork.
Front BrakesSingle 254mm disc
Rear BrakesSingle 254mm disc
Front Tyre5.10-16
Rear Tyre5.10-16
Wet Weight340 kg / 749.6 lbs
Fuel Capacity19 Litres / 5.0 US gal