Harley Davidson Dyna Low Rider (2014-15)

The Harley Davidson Dyna Low Rider, produced between 2014 and 2015, featured a four-stroke V-twin engine with a capacity of 1690cc and a compression ratio of 9.6:1. It boasted an electronic sequential port fuel injection and a single-fire, non-wasted, map-controlled spark ignition, as well as an exhaust system for a deep rumble. The bike had a maximum torque of 126 Nm at 3500 rpm and a six-speed transmission, with a primary drive chain ratio of 34/46. The frame was mild steel, with a tubular frame and rectangular section backbone, while the front suspension had a polished aluminum fork triple clamp and dual-rate springs. The rear suspension was a coil-over shock, and the brakes featured a single 300 mm disc and a 4-piston fixed caliper in the front and a single 292 mm disc and a 2-piston torque-free floating caliper in the rear. The front wheel was chrome, steel-laced (with the option of a black, split 5-spoke cast aluminum wheel), and the rear wheel was the same, both with corresponding tires. The bike had a 30.5-degree rake and a 128 mm trail, with a length of 2345 mm.

Technical specifications:

Make Model: Harley Davidson Dyna Low Rider

Year: 2014 – 15

Engine: Four stroke, V-Twin, Twin Cam 103 c with integrated oil cooler
Capacity: 1690 cc / 103.1 cu in
Bore x Stroke: 98.4 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.6:1
Exhaust: 2-into-1 Exhaust with a deep rumble
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 126 Nm / 112.8 kgf-m / 92.9 ft-lb @ 3500 rpm
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio
Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.790:1
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded

Lean Angle, Left: 30.5o
Lean Angle, Right: 29.5o
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over shock
Front Brakes: Single 300 mm disc, 4 piston fixed caliper
Rear Brakes: Single 292 mm disc, 2 piston torque free floatingcaliper
Front Wheel: Chrome, steel laced ( optional: Black, split 5-spoke cast aluminium)
Rear Wheel: Chrome, steel laced ( optional: Black, split 5-spoke cast aluminium)
Front Tyre: 100/90B19 57H
Rear Tyre: 160/70B17 73V
Rake: 30.5 degrees
Trail: 128 mm / 5.1 in
Dimensions: Length 2345 mm / 92.3 in.

Related models: