Harley Davidson 1200 Custom (2011-12)

The Harley Davidson XL 1200C Sportster Custom was manufactured between 2011-12. This motorcycle has a four-stroke, 45-degree V-twin, OHV, 2 valves per cylinder engine with a capacity of 1199 cc or 73.2 cubic inches, a compression ratio of 9.7:1, and Electronic Sequential Port Fuel Injection (ESPFI) induction. The bike can produce a maximum torque of 79 ft/lbs or 107 Nm at 3500 rpm and has a 5-speed transmission system with belted final drive. The motorcycle has a mild steel, tubular frame with circular sections and cast junctions, while the swingarm has mild steel rectangular tube sections with stamped junctions that are MIG welded. The front suspension system consists of a 39mm fork that has a front wheel travel of 144 mm/5.6 in, and the rear suspension system is coil-over, preload dual-adjustable, with a rear wheel travel of 54mm/2.1 in. The bike has single 300mm disc brakes with two 38mm piston calipers on both the front and rear wheels. Both front and rear wheels have five-spoke cast aluminum chrome wheels, and the tires are D402F MH90-21 54H for the front wheel and D401 150/80B16 71H for the rear wheel. The rake of the motorcycle is 30 degrees, and the trail is 107 mm/4.2 in. The length of the bike is 2225mm/87.6 in, with a wheelbase of 1520mm/59.8 in. The seat height is loaded at 26.6 in/675.64 mm, while unladen is 28.5 in/723.9 mm. The ground clearance is 110mm/4.3 in, and the wet weight is 264 kg or 582 lbs. The fuel capacity of the motorcycle is 17 liters or 4.5 US gallons, and the oil capacity with filter is 2.6 liters.

Technical specifications:

Make Model: Harley Davidson XL 1200C Sportster Custom