MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Ducati Specifications

Ducati Monster 796 (2012)

Entry updated

Ducati Monster 796 (2012)

At a glance

Capacity
803 cc / 49.0 cu in
Power
64 kW / 87 hp @ 8250 rpm
Torque
78.5 Nm / 8.0 kgf-m 58 lb-ft @ 6250rpm
Seat height
800 mm / 31.5 in

The full picture.

The Ducati Monster 796 is a motorcycle model from Ducati that was released in 2012. It has a four stroke, 90 degree L twin cylinder engine with a capacity of 803 cc and a compression ratio of 11.0:1. It is equipped with Siemens electronic fuel injection, 45mm throttle body, and Marelli electronic ignition for starting. The lightweight 2-1-2 exhaust system is equipped with a catalytic converter and twin lambda probes. The bike has a maximum power of 64 kW and a maximum torque of 78.5 Nm. It is driven by a six-speed clutch and transmission system with a final chain drive. The frame is a tubular steel trellis, and the suspension consists of Showa 43mm inverted forks and a Progressive linkage with fully adjustable Sachs monoshock with piggyback aluminum swing arm. The bike has 2 x 320mm disc front brakes and a single 245 mm disc rear brake with 120/70 -ZR17 front tire and 160/55 -ZR17 rear tire. The dry weight of the bike is 167 kg / 369 lbs, while the wet weight is 187 kg / 412 lbs. The fuel tank capacity is 15 L / 4.0 USgal / 3.3 Imp gal or 13.5 L / 3.6 US gal / 3.0 Imp gal with ABS. The bike has a consumption average of 5.2 L/100km, and a standing 1/4 mile time of 12.1sec with a top speed of 200.4 km/h / 124.5mph. The instrument panel displays a digital unit with a speedometer, rev counter, clock, scheduled maintenance warning, oil temperature, trip fuel, lap time, warning light for low oil pressure, fuel level, fuel reserve, neutral, turn signals, overrev, immobilizer, and is ready for a DDA system.


Technical specifications:

Make Model: Ducati Monster 796

Motorcycle technical specifications
Year2012
EngineFour stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valves per cylinder
Capacity803 cc / 49.0 cu in
Bore x Stroke88 x 66 mm
Compression Ratio11.0:1
Cooling SystemAir cooled
InductionSiemens electronic fuel injection, 45mm throttle body
IgnitionMarelli electronic
StartingElectric
Exhaust: Lightweight 2-1-2 system with catalytic converter with twin lambda probes
Max Power64 kW / 87 hp @ 8250 rpm
Max Torque78.5 Nm / 8.0 kgf-m 58 lb-ft @ 6250rpm
ClutchAPTC wet multiplate with hydraulic control
Transmission6 Speed
Final DriveChain; front sprocket 15; rear sprocket 39
Gear Ratio1st 32/13, 2nd 30/18, 3rd 28/21, 4th 26/23, 5th 22/22, 6th 24/26
Primary driveStraight cut gears; ratio 1.85:1
FrameTubular steel trellis
Front SuspensionShowa 43mm upside-down forks
Front Wheel Travel120 mm / 4.7 in
Rear SuspensionProgressive linkage with fully adjustable Sachs monoshock with piggy back aluminum swing arm
Rear Wheel travel148 mm / 5.8 in
Front Brakes2 x 320mm Discs, 4 piston calipers
Rear BrakesSingle 245 mm disc, 2 piston caliper
Front Tyre120/70 -ZR17
Rear Tyre160/55 -ZR17
Rake24 degrees
Trail87mm / 3.42 in
Wheelbase1450 mm / 57.1in
Seat Height800 mm / 31.5 in
Dry Weight167 kg – 369 lbs / 169 kg -373 lbs ABS version
Wet Weight187 kg / 412 lbs
Fuel Capacity15 L / 4.0 USgal / 3.3 Imp gal (13.5 L / 3.6 US gal / 3.0 Imp gal ABS version)
Consumption Average5.2 L/100 km / 19.1 km/l . 45 US mpg / 54 Imp mpg
Standing 1/4 Mile12.1 sec
Top Speed200.4 km/h / 124.5 mph
InstrumentationDigital unit displaying: Speedometer, rev counter, clock, scheduled maintenance warning, oil temperature, trip fuel, lap time, warning light for low oil pressure, fuel level, fuel reserve, neutral, turn signals, overrev, immobilizer. Ready for DDA system.