Derbi Senda SM 125 4T (2008)

The Derbi Senda SM 125 4T is a motorcycle from 2008. It has a four-stroke, single-cylinder engine with a capacity of 124 cc and a compression ratio of 11.0:1. The bike has a 22mm Keihin induction system and electronic ignition. It starts with an electric starter and has a maximum power output of 9 kW at 6500 rpm, as well as maximum torque of 9 Nm at the same rpm. The clutch is a multiplate system and the transmission has five speeds, with a final drive of a chain. The front suspension features 41mm Paoli forks, providing a front wheel travel of 195 mm, while the rear suspension is a Paoli monoshock with a rear wheel travel of 170 mm. The bike has single 300mm disc front brakes and single 220mm disc rear brakes, and rides on tyres sized 110/80-17 in the front and 130/70-17 in the rear. The seat is at a height of 830 mm and the dry weight is 116 kg, while fuel capacity is 7.5 litres.

---

Technical specifications:

Make Model: Derbi Senda SM 125 4T

Year: 2008 –

Engine: Four stroke, single cylinder. OHC

Capacity: 124 cc / 7.6 cu-in

Bore x Stroke: 56 x 49 mm

Cooling System: Air cooled

Compression Ratio: 11.0:1

Induction: 22mm Keihin

Ignition: Electronic

Starting: Electric

Max Power: 9 kW / 12 hp @ 6500 rpm

Max Torque: 9 Nm / 6.6 lb-ft @ 6500 rpm

Clutch: Multiplate

Transmission: 5 Speed

Final Drive: Chain

Front Suspension: 41mm Paoli forks

Front Wheel Travel: 195 mm / 7.6 in

Rear Suspension: Paoli monoshock

Rear Wheel Travel: 170 mm / 6.7 in

Front Brakes: Single 300mm disc

Rear Brakes: Single 220mm disc

Front Tyre: 110/80 -17

Rear Tyre: 130/70 -17

Seat Height: 830 mm / 32.7 in

Dry Weight: 116 kg / 255.7 lbs

Fuel Capacity: 7.5 Litres / 2.0 US gal