The Can-Am Spyder RT Limited motorcycle was produced between 2016 and 2017. It had a 1330cc engine with a liquid cooling system and an electronic fuel injection with electronic throttle control. Its maximum power was 115 horsepower and maximum torque was 130 Nm at 5000 rpm. The clutch was a wet, multi-plate manual or electronic operation and had a 6-speed transmission. The final drive was a belt with a front suspension of SACHS shocks and double A-arm with anti-roll bar, and a rear suspension of a swing-arm, air preload SACHS shock. Its brakes were foot-actuated and fully integrated hydraulic 3-wheel braking system with a single 270mm disc 2 piston caliper at the rear with an integrated parking brake. It weighed 450 kg with a fuel capacity of 27 litres and a storage capacity of 24.4 litres. The dimensions were 2667 mm in length, 1572 mm in width, and 1510 mm in height, with a wheelbase of 1714 mm, seat height of 772 mm, and ground clearance of 115 mm.
Make Model: Can-Am Spyder RT Limited
Year: 2016 – 17
Engine: Rotax 1330 ACE, four stroke, transverse three cylinder, DOHC, 4 valve per cylinder
Capacity: 1330cc / 81.1 cu-in
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…