The Cagiva Mito 125 II Replica is a 1993 motorcycle model with a two-stroke, single cylinder engine and an electric variable power read valve. It has a capacity of 125.6 cc and a compression ratio of 13.0:1. The bike features a 28mm Dell’Orto flat slide carburetor and CDI ignition, with a kick start. The maximum power is 33.5 hp at 10500 rpm and the maximum torque is 19 Nm at 9000 rpm. It has a 7-speed transmission and a chain final drive. The front suspension is USD telescopic forks and the rear suspension is a swinging arm single shock. The front brake is a single 320mm disc with a 4-piston caliper and the rear brake is a single 230mm disc with a 1-piston caliper. The front tire size is 110/70-17 and the rear tire size is 150/70-17. The dry weight is 117 kg and the wet weight is 125 kg with a fuel capacity of 12.8 liters. The bike can brake from 60-0 in 13.1 meters and from 100-0 in 37 meters. It has a standing quarter-mile time of 14.0 seconds and reaches a top speed of 164.2 km/h.
Make Model: Cagiva Mito 125 II Replica
Year: 1993
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…