MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

BMW Specifications

BMW R80 Mono (1984-85)

Entry updated

BMW R80 Mono (1984-85)

At a glance

Capacity
797.5 cc / 48.7 cu in.
Power
36.4 kW / 50 hp @ 6500 rpm
Torque
58 Nm / 5.9 kgf-m / 42 ft/lb @ 4000 rpm

The full picture.

The BMW R80 Mono is a motorcycle from 1984-85 with a four-stroke, 797.5cc engine that produces 36.4 kW/50 hp at 6500 rpm with a maximum torque of 58 Nm/5.9 kgf-m/42 ft/lb at 4000 rpm. The engine has a compression ratio of 9.2:1, and it is cooled by air with 2 valves per cylinder that are pushrod-operated. The bike has 2 Bing constant depression carburetors for air intake and a Bosch 12 V/280 W alternator. The clutch is a dry single plate with a diaphragm spring and the transmission has 5 speeds with a final drive of a shaft. The frame is a double loop tubular with bolt-on rear section, and the suspension consists of telescopic hydraulic forks in the front and a Monolever swinging arm in the rear. The front brakes have a single 285mm disc with 1 piston calipers, while the rear brakes have a 200mm drum. The front wheel is MTH 2.50 x 18 E and the rear wheel is MTH 2.50 x 18 E with front and rear tires of 90/90-17 and 120/90-18, respectively. The bike has a length of 2175mm, width of 800mm, and height of 1106mm with a wheelbase of 1447mm and a ground clearance of 140mm. The wet weight is 210kg and the fuel capacity is 22 liters. The bike has an average consumption of 5.9L/100 km or 17.0 km/l or 40 US mpg. The standing 1/4 mile is 14.5 sec with a top speed of 180 km/h or 112 mph.


Technical specifications:

Make Model: BMW R 80 Mono

Motorcycle technical specifications
Year1984-85
EngineFour stroke, two cylinder horizontally opposed Boxer, pushrod operated 2 valves per cylinder.
Capacity797.5 cc / 48.7 cu in.
Bore x Stroke84.8 x 70.6 mm
Cooling SystemAir cooled
Compression Ratio9.2:1
Induction2 x Bing constant depression carburetors
IgnitionBattery ignition
AlternatorBosch 12 V/280 W
Spark PlugBosch W 7 D / Beru14-7DU / Champion N9YC
StartingElectric
Max Power36.4 kW / 50 hp @ 6500 rpm
Max Torque58 Nm / 5.9 kgf-m / 42 ft/lb @ 4000 rpm
ClutchDry single plate, with diaphragm spring
Transmission5 Speed
Final DriveShaft
Gear Ratio1st 4.40 /2nd 2.86 /3rd 2.07 /4th 1.67 /5th 1.50:1
Rear Wheel Ratio1:3.20 or 1:3.36
FrameDouble loop tubular frame with bolt on rear section
Front SuspensionTelescopic hydraulic forks.
Front Wheel Travel175 mm / 6.8 in
Rear SuspensionMonolever swinging arm.
Rear Wheel Travel120 mm / 4.7 in
Front BrakesSingle 285mm disc, 1 piston calipers
Rear Brakes200mm Drum
Front WheelMTH 2.50 x 18 E
Rear WheelMTH 2.50 x 18 E
Front Tyre90/90-17
Rear Tyre120/90-18
DimensionsLength 2175 mm / 85.6 in Width 800 mm / 31.2 in Height 1106 mm / 43.5 in
Wheelbase1447 mm / 56.9 in
Ground Clearance140 mm / 5.51 in
Wet Weight210 kg / 462 lbs
Fuel Capacity22 Litres / 5.8 US gal
Consumption Average5.9 L/100 km 17.0 km/l / 40 US mpg
Standing 1/4 Mile14.5 sec
Top Speed180 km/h / 112 mph