MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

BMW Specifications

BMW K1300GT (2010)

Entry updated

BMW K1300GT (2010)

At a glance

Capacity
1298 cc / 79.2 cu in.
Power
127 kW / 173 hp @ 9250 rpm
Torque
140 Nm / 14.3 kgf-m / 103 lb-ft @ 8250 rpm
Seat height
820 – 840 mm / 32.3 – 33.1 in (low seat 800- 820 mm / 31.5 – 32.3 in)

The full picture.

The BMW K 1300GT is a 2010 motorcycle with a four-stroke, transverse four-cylinder engine, DOHC, and four valves per cylinder. It has a capacity of 1298 cc and a compression ratio of 13.0:1. The motorcycle is liquid cooled and has electronic fuel injection with a digital motor electronics system. It has a maximum power of 127 kW and a maximum torque of 140 Nm, with a 6-speed transmission and a final drive that is shaft gear. The motorcycle has front and rear suspension, with BMW Motorrad Duolever and central spring strut, and cast aluminum single swingarm with BMW Motorrad, respectively. It also has front and rear brakes, Rim dimensions of 120/70 ZR17 and 180/55 ZR17, a wet weight of 255 kg, and a fuel capacity of 19 L. The average fuel consumption is 6.2 L/100 km, and the top speed is 252.2 km/h. The standing 1/4 Mile is 11.4 seconds. The motorcycle has received positive reviews from Motorcycle and Motorcycle USA.


Technical specifications:

Make Model: BMW K 1300GT

Motorcycle technical specifications
Year2010
EngineFour stroke, transverse four cylinder, DOHC, 4 valves per cylinder
Capacity1298 cc / 79.2 cu in.
Bore x Stroke80 x 64.3 mm / 3.15 x 2.53″
Compression Ratio13.0:1
Cooling SystemLiquid cooled
InductionElectronic fuel injection, Digital Motor Electronics with integrated knock control (BMS-K)
StartingElectric
Exhaust managementFully controlled three-way catalyst
ClutchMultiple-plate clutch in oil bath, hydraulically operated
Max Power127 kW / 173 hp @ 9250 rpm
Max Torque140 Nm / 14.3 kgf-m / 103 lb-ft @ 8250 rpm
Transmission6 Speed
Final DriveShaft
Gear Ratio1st 2.398 / 2nd 1.871 / 3rd 1.525 / 4th 1.296 / 5th 1.143 / 6th 1.015:1
FrameBridge frame, aluminium, load-bearing engine
Front SuspensionBMW Motorrad Duolever; central spring strut, Paralever; central spring strut with lever system
Front Wheel Travel115 mm / 4.5 in.
Rear SuspensionCast aluminium single swing arm with BMW Motorrad, spring pre-tension with infinite hydraulic adjustment
Rear Wheel Travel135 mm / 5.3 in
Front Brakes2 x 320mm discs, 4 piston calipers
Rear BrakesSingle 265mm disc, 2 piston caliper
Front Tyre120/70 ZR17
Rear Tyre180/55 ZR17
Seat Height820 – 840 mm / 32.3 – 33.1 in (low seat 800- 820 mm / 31.5 – 32.3 in)
Wet Weight255 kg / 562 lbs
Fuel Capacity19 L / 5.0 US gal
Consumption Average6.2 L/100 km 16.1 km/l / 37.9 US mpg
Standing 1/4 Mile11.4 sec
Top Speed252.2 km/h / 156.7 mph
ReviewsMotorcycle / Motorcycle USA