MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Benelli Specifications

Benelli Tre (2015)

Entry updated

Benelli Tre (2015)

At a glance

Capacity
1131 cc / 69 in
Power
92 kW /123 hp @ 9000 rpm
Seat height
849 mm / 33.5 in

The full picture.

The Benelli TNT 1130 K is a motorcycle model from 2015 with a transverse three-cylinder, four-stroke engine, with 1131cc capacity and a compression ratio of 11.6:1. It’s liquid-cooled, with electronic injection and a catalytic converter, and has a maximum power of 92kW/123hp at 9000rpm. The clutch is wet with hydraulic command, and it has a six-speed transmission with chain drive. The primary drive is 44/79, and the frame is decomposable, with a front steel trestle and rear aluminum alloy casting. The front suspension is an upside-down fork with hydraulic extensions, while the rear suspension is a steel tube trestle swingarm with hydraulic adjustment and spring preload. The front brakes consist of two 320mm discs with a 4 piston caliper, whilst the rear brakes are a single 240mm disc with a 2 piston caliper. The motorcycle has a dry weight of 205kg/452lbs and a wet weight of 215kg/474lbs. With a fuel capacity of 16L/4.2US gal, the Benelli TNT 1130 K also has a seat height of 849mm/33.5in, a wheelbase of 1515mm/59.7in and dimensions of 2182mm/85.9in length and 849mm/33.5in width.


Technical specifications:

Make Model: Benelli TNT 1130 K

Motorcycle technical specifications
Year2015
EngineFour stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity1131 cc / 69 in
Bore x Stroke88 x 62 mm
Cooling SystemLiquid cooled
Compression Ratio11.6:1
LubricationWet sump
InductionElectronic injection with 1 injector per cylinder
ExhaustWith catalytic converter and oxygen sensor
Spark PlugNGK CR9E
IgnitionElectronic injection
ElectricElectric
Max Power92 kW /123 hp @ 9000 rpm
ClutchWet clutch with hydraulic command
Transmission6 Speed
Final DriveChain drive, ratio 16:37
Primary Drive44/79
FrameDecomposable, front steel trestle, rear aluminium alloy casting
Front Suspension~A50 mm upside-down fork, with hydraulic extension, compression and spring preload adjustments
Front Wheel Travel150 mm / 5.9 in
Rear SuspensionSteel tube trestle swingarm, rear dumper with hydraulic adjustment (extension, high and low speed compression) and spring preload assembled with progressive link
Rear Wheel Travel144 mm / 5.7 in
Front Brakes2 x 320 mm discs, 4 piston caliper
Rear BrakesSingle 240 mm disc, 2 piston caliper
Front Tyre120/70-17
Rear Tyre190/50-17
DimensionsLength: 2182 mm / 85.9 in Width: 849 mm / 33.5 in
Wheelbase1515 mm / 59.7 in
Seat Height849 mm / 33.5 in
Dry Weight205 kg / 452 lbs
Wet Weight215 kg / 474 lbs
Fuel Capacity16 Litres / 4.2 US gal