MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Benelli Specifications

Benelli Tre (2008-09)

Entry updated

Benelli Tre (2008-09)

At a glance

Capacity
1130 cc / 69 cu in
Power
92 kW / 123 hp @ 9000 rpm
Torque
115 Nm / 11.4 kgm / 67.9 lb-ft @ 6250 rpm
Seat height
838 mm / 32.9 in

The full picture.

The Benelli Tre-K 1130 is a motorcycle that was produced between 2008 and 2009. It features a four-stroke, transverse three-cylinder engine with a capacity of 1130 cc and a compression ratio of 11.5:1. The bike is liquid-cooled and uses electronic injection with one injector per cylinder. The ignition is also electronic injection. The bike produces up to 123 horsepower at 9000 rpm and 115 Nm of torque at 6250 rpm.

The clutch is a wet clutch with hydraulic command, and the transmission is a six-speed gearbox. The bike is chain-driven with a ratio of 16:37 and has a mixed solution frame that includes an ASD steel tube trellis and an aluminum alloy casting. The front suspension is a Marzocchi 50 mm upside-down fork damping system, while the rear suspension is an ASD steel tube trellis swingarm with an Extreme Technology single shock absorber.

The bike has 2 x 320 mm A discs with four-piston calipers for the front brakes and a single 240 mm disc with a two-piston caliper for the rear brakes. The front tire is 120/70-17, while the rear tire is 180/55-17. The bike has a length of 2183 mm, a width of 850 mm, and a height of 1320 mm, with a wheelbase of 1515 mm and a dry weight of 205 kg.

The fuel capacity is 18 liters, and the average consumption is 5.6 L/100 km, with a top speed of 221.4 km/h. The bike can go from 0 to 100 km/h in 3.5 seconds, and the standing quarter-mile time is 11.5 seconds. Overall, the Benelli Tre-K 1130 is a powerful and well-designed motorcycle that offers impressive performance and handling capabilities.


Technical specifications:

Make Model: Benelli Tre-K 1130

Motorcycle technical specifications
Year2008 – 09
EngineFour stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity1130 cc / 69 cu in
Bore x Stroke88 x 62 mm
Cooling SystemLiquid cooled
Compression Ratio11.5:1
LubricationWet sump
InductionElectronic injection with 1 injector per cylinder
ExhaustWith catalytic converter and oxygen sensor
Spark PlugNGK CR9E
IgnitionElectronic injection
ElectricElectric
Max Power92 kW / 123 hp @ 9000 rpm
Max Torque115 Nm / 11.4 kgm / 67.9 lb-ft @ 6250 rpm
ClutchWet clutch with hydraulic command
Transmission6 Speed
Final DriveChain drive, ratio 16:37
Primary Drive44/79
Gear Ratio1st 14/39 / 2nd 18/35 / 3rd 21/32 / 4th 23/30 / 5th 24/28 / 6th 26/27
FrameMixed solution. Front: ASD steel tube trellis, fastened to boxed rear section, aluminium alloy castings. Subframe: aluminium die-cast.
Front SuspensionMarzocchi 50 mm upside down fork damping, rebound and spring pre-load adjustment.
Rear SuspensionASD steel tube trellis swingarm with Extreme Technology single shock absorber with adjustable rebound and spring preload.
Front Brakes2 x 320 mm ~A, discs 4 piston caliper
Rear BrakesSingle 240 mm disc, 2 piston caliper
Front Tyre120/70-17
Rear Tyre180/55-17
DimensionsLength: 2183 mm / 85.9 in Width: 850 mm / 37.4 in Height: 1320 mm / 51.9 in
Wheelbase1515 mm / 59.6 in
Seat Height838 mm / 32.9 in
Ground Clearance140 mm / 5.7 in
Dry Weight205 kg / 451.9 lbs
Fuel Capacity18 Litres / 4.8 US gal
Consumption Average5.6 L/100 km / 17.9 km/l / 42.1 US mpg
Standing 1/4 Mile11.5 sec
Standing 0 – 100km/h / 62 mph3.5 sec
Standing 0 – 140km/h / 87 mph5.4 sec
Standing 0 – 200km/h / 124 mph9.9 sec
Acceleration 60-140 km/h6.8 sec
Top Speed221.4 km/h / 137.5 mph