Benelli Tornado 1130 (2008-09)

The Benelli Tornado Tre 1130 is a motorcycle model from 2008-09. It has a four stroke, transverse three cylinder engine with a capacity of 1130cc. The cooling system is liquid cooled and the compression ratio is 11.5:1. The bike has electronic injection with one injector per cylinder, and a wet sump lubrication. It also has a wet clutch with hydraulic command and a 6-speed transmission with a chain drive. The front suspension is a Marzocchi upside-down stanchion fork that is adjustable in compression and extension with spring pre-load, while the rear suspension has an asymmetric swingarm composed of cast aluminium and pressed in aluminium alloy. The bike also has front and rear brakes with a disc and piston caliper, and the wheelbase is 1419mm while the seat height is 807mm. The Tornado Tre 1130 weighs 195kg and has a fuel capacity of 20.8 litres.

Technical specifications:

Make Model: Benelli Tornado Tre 1130

Year: 2008 – 09
Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Capacity: 1130 cc / 69 cu in
Bore x Stroke: 88 x 62 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: Electronic injection with 1 injector per cylinder
Exhaust: With catalytic converter and oxygen sensor
Spark Plug: NGK CR9E
Ignition: Electronic injection
Electric: Electric
Max Power: 120 kW / 163 hp @ 10500 rpm
Max Torque: 124 Nm / 12.6 kgf-m / 91.45 lb-ft @ 8000 rpm
Clutch: Wet clutch with hydraulic command
Transmission: 6 Speed
Final Drive: Chain drive, ratio 16:37
Primary Drive: 44/79
Gear Ratio: 1st 14/39 / 2nd 18/35 / 3rd 21/32 / 4th 23/30 / 5th 24/28 / 6th 26/27
Frame: Mixed solution. Front: ASD steel tube trellis, fastened to boxed rear section, aluminium alloy castings. Subframe: aluminium die-cast.
Front Suspension: Marzocchi upside down stanchion fork 50mm, adjustable in compression and extension with spring pre-load
Rear Suspension: Asymmetric swingarm, composed of cast aluminium and pressed in aluminium alloy, with Extreme Technology single shock absorber adjustable in compression, dual regulation for low and high speed damping andextension and spring pre-load.
Front Brakes: 2 x 320mm discs, 4 piston caliper
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 120/70-17
Rear Tyre: 190/50-17
Wheelbase: 1419 mm / 55.9 in
Seat Height: 807 mm / 31.8 in
Ground Clearance: 140 mm / 5.7 in
Dry Weight: 195 kg / 430 lbs
Fuel Capacity: 20.8 Litres / 5.5 gal