The Benelli 125 BKX motorcycle was manufactured in 1972 and had a two-stroke, single-cylinder engine with a capacity of 169.65 cc/10.3 cu in. It had a bore x stroke of 60 x 60 mm and a compression ratio of 8.0:1. The cooling system was air-cooled and it had a 22mm Dell’Orto carburetor for induction. The ignition was flywheel magneto and the battery was a 6V. The motorcycle had a kick start and a 4-speed transmission with the final drive being through a chain.
The frame was made of duplex tubular steel, with a Marzocchi telescopic fork for the front suspension and twin Marzocchi shocks for the rear suspension. The brakes on both the front and rear were drum brakes. The wheelbase was 1270mm/50in and the seat height was 812mm/32in, while the ground clearance was 235mm/9.25in. The front tire was 2.75-19, and the rear tire was 3.00-19. It had a fuel capacity of 10L/2.6US gal and could reach a top speed of 80 km/h/50 mph.
Technical specifications:
Make Model: Benelli 175 Enduro
| Year | 1972 |
|---|---|
| Engine | Two stroke, single cylinder |
| Capacity | 169.65 cc / 10.3 cu in |
| Bore x Stroke | 60 x 60 mm |
| Compression Ratio | 8.0:1 |
| Cooling system | Air cooled |
| Induction | 22 mm Dell’Orto carburetor |
| Ignition | Flywheel Magneto |
| Battery | 6V |
| Starting | Kick start |
| Transmission | 4 Speed |
| Final Drive | Chain |
| Frame | Duplex tubular steel |
| Front Suspension | Marzocchi telescopic fork |
| Rear Suspension | Twin Marzocchi shocks |
| Front Brakes | Drum |
| Rear Brakes | Drum |
| Wheelbase | 1270 mm / 50 in |
| Seat Height | 812 mm / 32 in |
| Ground Clearance | 235 mm / 9.25 in |
| Front Tyre | 2.75 -19 |
| Rear Tyre | 3.00 -19 |
| Fuel Capacity | 10 L / 2.6 US gal |
| Top Speed | 80 km/h / 50 mph |
