Aprilia RSV 1000 Mille (2000)

The Aprilia RSV 1000 Mille motorcycle was released in the year 2000 and has a four-stroke, longitudinal 60-degree V twin engine with DOHC and four valves per cylinder. The bike has a capacity of 997.6cc or 60.9 cubic inches and a compression ratio of 11.4:1. The fuel injection system and digital electronic ignition with two spark plugs per cylinder enable maximum power of 93.3 kW or 128 hp at 9500 rpm and maximum torque of 103 Nm or 76.0 ft.lbs at 7250 rpm. The clutch is a multiple-disk in oil bath with patented PPC-assisted hydraulic control, and the transmission has six speeds with final drive by chain. The bike has a front suspension of an upside-down ~Ahlins fork with 43mm titanium nitride-treated sleeves and a rear suspension of a swing arm in aluminum alloy with a progressive linkage with APS system and ~Ahlins Racing hydraulic shock absorber. The front brakes consist of two 320mm discs with four-piston calipers, and the rear brake is a single 220mm disc with a two-piston caliper. The motorcycle has a length of 2035 mm and a width of 730 mm with a height of 1145 mm and a wheelbase of 1418 mm. The seat height is 825 mm, and the dry weight is 189 kg or 416.7 lbs with a wet weight of 220 kg or 485 lbs. The fuel capacity for the bike is 20 L or 5.2 US gal with a reserve of 4 L or 1.1 US gal, and fuel consumption averages 6.5 L/100km, 15.3 km/L, or 36 mpg. The standing 1/4 mile for the bike is 10.9 seconds with a speed of 198 km/h or 123 mph, and the top speed is 272 km/h or 167 mph.

Technical specifications:

Make Model: Aprilia RSV 1000 Mille