The Aprilia ETX 350 was a single-cylinder, four-stroke motorcycle manufactured in 1985-86. It had a capacity of 349.2 cc and a maximum power output of 26 hp at 7500 rpm. The bike had a compression ratio of 9.6:1 and used an air cooling system, with a hydraulic telescopic front fork and swingarm with single shock absorber for suspension. Its front and rear brakes used single discs, and it had a chain final drive. Its wheelbase measured 1481 mm, and its wet weight was 167 kg. The motorcycle had a fuel capacity of 13 L and achieved a top speed of 86.6 mph. It could complete a standing quarter-mile in 15.7 seconds, reaching a speed of 121.6 km/h. Overall, the Aprilia ETX 350 was a powerful bike with reliable handling and satisfactory performance, suitable for casual riders and commuters alike.
Make Model: Aprilia ETX 350
Year: 1985-86
Engine: Four stroke, single cylinder, 4 valves, OHC
Capacity: 349.2 cc / 21.3 cu in
Bore x Stroke: 79.5 x 70.4 mm
Compression Ratio: 9.6:1
Cooling System: Air cooled
Starting: Electric
Max Power: 19.4 kW / 26 hp @ 7500 rpm
Max Torque: 28.4 Nm / 2.9 kgf-m / 20.9 lb-ft @ 6000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic telescopic front fork
Rear Suspension: Swingarm with single shock absorber.
Front Brakes: Single disc
Rear Brakes: Single disc
Front Tyre: 90/90-21
Rear Tyre: 130/80-17
Wheelbase: 1481 mm / 58.3 in.
Wet Weight: 167 kg / 368 lbs
Fuel Capacity: 13 L / 3.4 US gal
Standing 1/4 Mile: 15.7 sec / 121.6 km/h / 75.6 mph
Top Speed: 139.3 km/h / 86.6 mph
The 2024 Suzuki V-Strom 800 is the road-focused member of the 776 cc V-Strom family.…
The Suzuki GSX-8R is a fully faired middleweight introduced for the 2024 model year. Its…
The 2024 BMW R 1300 GS introduces a redesigned 1300 cc boxer engine and a…
The Yamaha YZF-R9 joins the supersport range for 2025 with an 890 cc three-cylinder engine.…
The Honda XL750 Transalp combines a 755 cc parallel-twin engine with a 21-inch front wheel…
The 2025 Honda CB750 Hornet is a middleweight roadster powered by a 755 cc parallel…