Alfer TX300 (1988-92)

The Alfer TX 300 motorcycle was produced between 1988 and 1992. It has a single cylinder, 2-stroke engine with a capacity of 258cc, a compression ratio of 10.5:1 and uses a Del ‘Orto PHBH 26 ZS carburetor for induction. The motorcycle also features electronic Motoplat ignition and a kick-start. It has a 6-speed transmission and final drive is through chain. The front suspension uses Marzocchi inverted shocks while the rear features a Marzocchi monoshock PRS2, giving it a rear wheel travel of 180mm / 7.1 in. The wheels are made of steel/alloy with wire spokes, and the dimensions of the motorcycle are 2020mm / 79.5 in in length, 870 mm / 34.3 in in width and 1140 mm / 44.9 in in height, with a wheelbase of 1330 mm / 52.4 in. The motorcycle has a ground clearance of 370 mm / 14.6 in and a dry weight of 86 kg / 190 lbs. It has a very small fuel capacity of 4 L / 1.1 US gal, and a seat height of 750 mm / 29.5 in.

Technical specifications:

Make Model: Alfer TX 300

Year: 1988 – 92
Engine: Single cylinder, 2-stroke
Capacity: 258 cc / 15.7 cu in
Bore x Stroke: 74 x 60 mm
Cooling System: Air cooled
Compression Ratio: 10.5:1
Exhaust: 1-into-1
Induction: Del ‘Orto PHBH 26 ZS carburetor
Ignition: Electronic Motoplat
Starting: Kick
Transmission: 6-Speed
Final Drive: Chain
Front Suspension: Marzocchi inverted shocks, 35 mm
Front Wheel Travel: 170 mm / 6.7 in
Rear Suspension: Marzocchi monoshock PRS2
Rear Wheel Travel: 180 mm / 7.1 in
Wheels: Steel/alloy with wire spokes
Dimensions: Length: 2020mm / 79.5 in Width: 870 mm / 34.3 in Height: 1140 mm / 44.9 in
Wheelbase: 1330 mm / 52.4 in
Ground Clearance: 370 mm / 14.6 in
Seat Height: 750 mm / 29.5 in
Dry Weight: 86 kg / 190 lbs
Fuel Capacity: 4 L / 1.1 US gal