The Alfer TX 300 motorcycle was produced between 1988 and 1992. It has a single cylinder, 2-stroke engine with a capacity of 258cc, a compression ratio of 10.5:1 and uses a Del ‘Orto PHBH 26 ZS carburetor for induction. The motorcycle also features electronic Motoplat ignition and a kick-start. It has a 6-speed transmission and final drive is through chain. The front suspension uses Marzocchi inverted shocks while the rear features a Marzocchi monoshock PRS2, giving it a rear wheel travel of 180mm / 7.1 in. The wheels are made of steel/alloy with wire spokes, and the dimensions of the motorcycle are 2020mm / 79.5 in in length, 870 mm / 34.3 in in width and 1140 mm / 44.9 in in height, with a wheelbase of 1330 mm / 52.4 in. The motorcycle has a ground clearance of 370 mm / 14.6 in and a dry weight of 86 kg / 190 lbs. It has a very small fuel capacity of 4 L / 1.1 US gal, and a seat height of 750 mm / 29.5 in.
Technical specifications:
Make Model: Alfer TX 300
| Year | 1988 – 92 |
|---|---|
| Engine | Single cylinder, 2-stroke |
| Capacity | 258 cc / 15.7 cu in |
| Bore x Stroke | 74 x 60 mm |
| Cooling System | Air cooled |
| Compression Ratio | 10.5:1 |
| Exhaust | 1-into-1 |
| Induction | Del ‘Orto PHBH 26 ZS carburetor |
| Ignition | Electronic Motoplat |
| Starting | Kick |
| Transmission | 6-Speed |
| Final Drive | Chain |
| Front Suspension | Marzocchi inverted shocks, 35 mm |
| Front Wheel Travel | 170 mm / 6.7 in |
| Rear Suspension | Marzocchi monoshock PRS2 |
| Rear Wheel Travel | 180 mm / 7.1 in |
| Wheels | Steel/alloy with wire spokes |
| Dimensions | Length: 2020mm / 79.5 in Width: 870 mm / 34.3 in Height: 1140 mm / 44.9 in |
| Wheelbase | 1330 mm / 52.4 in |
| Ground Clearance | 370 mm / 14.6 in |
| Seat Height | 750 mm / 29.5 in |
| Dry Weight | 86 kg / 190 lbs |
| Fuel Capacity | 4 L / 1.1 US gal |