MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson FXDL  Dyna Low Rider (2002-03)

Entry updated

Harley Davidson FXDL  Dyna Low Rider (2002-03)

At a glance

Capacity
1449 cc / 76.3 cu-in
Power
67 hp / 48.8 kW @ 5200 rpm
Torque
107 Nm / 10.8 kgf-m @ 3300 rpm
Seat height
Laden2 655 mm / 25.8 in. Unladen 680 mm / 26.80 in.

The full picture.

The Harley Davidson FXDL/I Dyna Low Rider is a motorcycle manufactured from 2002 to 2003. It features a four-stroke, 45-degree V-twin OHV engine with a capacity of 1449 cc, delivering a maximum power of 67 hp at 5200 rpm and a maximum torque of 107 nm at 3300 rpm. The engine is cooled by air and has a compression ratio of 8.9:1. The bike has a 5-speed transmission with a belt final drive and a maximum speed of approximately 105 mph. The frame of the motorcycle is made of mild steel tubing with a rectangular section backbone. The front suspension features a 39mm aluminum fork triple clamp and dual-rate springs, while the rear suspension is a coil-over dual shock. The front and rear brakes are single disc 292mm, and the wheels are fitted with D401F 100/90-19 57H front tire and D401 150/80B16 71H rear tire. The rake is set at 29 degrees with a trail of 114.3 mm and a fork angle of 30.5 degrees to 30 degrees. The bike has a length of 2364.0 mm and a wheelbase of 1640 mm. The seat height is 655 mm when laden and 680mm when unladen, and the ground clearance is 142.0 mm. The fuel tank capacity is 18.5 liters or 4.89 US gallons.


Technical specifications:

Make Model: Harley Davidson FXDL/I Dyna Low Rider

Motorcycle technical specifications
Year2002 – 03
EngineFour stroke, 45 degrees V-Twin, OHV,
Capacity1449 cc / 76.3 cu-in
Bore x Stroke95.3 x 101.6 mm
Cooling SystemAir cooled
Compression Ratio8.9:1
InductionCarburettor. 40mm CV with enricher and accelerator pump
IgnitionSingle-fire, non-wasted, map-controlled spark ignition
StartingElectric
Max Power67 hp / 48.8 kW @ 5200 rpm
Max Torque107 Nm / 10.8 kgf-m @ 3300 rpm
Transmission5 Speed
Final DriveBelt 70/32 ratio (68/32 ratio)
Gear rRatio1st 10.110 2nd 6.958 3rd 4.953 4th 3.862 5th 3.150
FrameMild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension39 mm w/ polished aluminum fork triple clamp and dual-rate springs
Rear SuspensionCoil over dual shock
Front BrakesSingle 292mm disc
Rear BrakesSingle 292mm disc
Front TyreD401F 100/90-19 57H
Rear TyreD401 150/80B16 71H
Rake29 degrees
Fork Angle 30.5 degrees30 degrees
Trail114.3 mm / 4.5 in
DimensionsLength 2364.0 mm / 93.1 in
Seat HeightLaden2 655 mm / 25.8 in. Unladen 680 mm / 26.80 in.
Wheelbase1640 mm / 64.6 in
Ground Clearance142.0 mm / 5.6 in
Fuel Capacity18.5 Litres / 4.89 US gal