MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson XL 883N Iron (2018-19)

Entry updated

Harley Davidson XL 883N Iron (2018-19)

At a glance

Capacity
883 cc / 53.9cu in/
Torque
73 Nm / 7.44 kgf-m / 53.8 ft/lb @ 3750 rpm
Seat height
Laden 653 mm / 25.7 in Unladen 734 mm / 28.9 in.

The full picture.

The Harley Davidson XL 883N Sporter Iron is a motorcycle model produced between 2018-19. It has a four-stroke, V-Twin engine with a capacity of 883cc and is air-cooled with a compression ratio of 8.8:1. The bike includes electronic sequential port fuel injection, digital CDI ignition, and an electric starter. The clutch is a multi-plate design with a diaphragm spring in oil, and the transmission is five-speed with a belt for final drive. The frame is made of mild steel, with a tubular design and cast junctions. The front suspension consists of 39mm forks, with a rear suspension using a coil-over, dual-adjustable preload. The front wheel has a 300mm disc with two 38mm piston calipers, while the rear wheel has a 260mm disc with the same calipers. The motorcycle has a 30-degree rake and 117mm of trail. It measures 2179mm in length, 821mm in width, and 1107mm in height, with a wheelbase of 1519mm. The seat height varies between 653mm and 734mm depending on whether the bike has any load. The bike has a wet weight of 256.3kg and an oil capacity of 2.6 litres, with a fuel capacity of 12.5 litres.


Technical specifications:

Make Model: Harley Davidson XL 883N Sporter Iron

Motorcycle technical specifications
Year2018 – 19
EngineFour stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity883 cc / 53.9cu in/
Bore x Stroke76.2 x 96.8 mm
Cooling SystemAir cooled
Compression Ratio8.8:1
ExhaustChrome, staggered, shorty exhaust with dual mufflers
inductionElectronic sequential port fuel injection
IgnitionDigital CDI
StartingElectric
Max Torque73 Nm / 7.44 kgf-m / 53.8 ft/lb @ 3750 rpm
ClutchMulti-plate clutch with diaphragm spring in oil bath
Transmission5 Speed
Final DriveBelt
Primary DriveChain, 34/57 ratio
Gear Ratio1st 10.407 / 2nd 7.436 / 3rd 5.53 / 4th 4.583 / 5th 3.93
FrameMild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Front Suspension39mm Fork
Front Wheel Travel92 mm / 3.62 in.
Rear SuspensionCoil-over, dual-adjustable preload
Rear Wheel Travel41 mm / 1.6 in.
Front BrakesSingle 300mm disc, 2 x 38mm piston calipers
Rear BrakesSingle 260mm disc, 2 x 38mm piston calipers
Front WheelBlack, 13-spoke cast aluminium
Rear WheelBlack, 13-spoke cast auminium
Front Tyre100/90B19 57H
Rear Tyre130/90-16
Rake30 degrees
Trail117 mm / 4.6 in
DimensionsLength 2179 mm / 85.8 in Width 821 mm / 32.3 in Height 1107 mm / 43.5 in
Wheelbase1519 mm / 59.5 in.
Seat HeightLaden 653 mm / 25.7 in Unladen 734 mm / 28.9 in.
Ground Clearance120 mm / 4.7 in
Wet Weight256.3 kg / 565 lbs
Oil Capacity2.6 Litres / 0.69 US gal
Fuel Capacity12.5 Litres / 3.3 US gal