MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Yamaha Specifications

Yamaha IT 250 (1982-83)

Entry updated

Yamaha IT 250 (1982-83)

At a glance

Capacity
246 cc / 15.07 cu-in
Power
32.2 hp @ 7500 rpm
Torque
22.6 / 3.12 kg-m @ 7500 rpm

The full picture.

The Yamaha IT 250 was produced from 1982-83 and had a two-stroke, single cylinder, read valve engine with a capacity of 246cc. It had a compression ratio of 9.8;1, an upswept expansion chamber with a USFS-approved spark arrestor and silencer for its exhaust system, and used a 30mm Mikunis carburetor for induction. The CDI ignition and kick start allowed for a max power of 32.2 hp at 7500 rpm with a max torque of 22.6/3.12 kg-m at the same speed. The motorcycle had a six-speed transmission with a final drive of chain and had a frame of single-downtube, full-cradle chrome-moly frame with aluminum box-section swing arm. The front suspension was air-assisted, oil-damped fork with a wheel travel of 380 mm and the rear suspension had an aluminum-bodied monoshock with adjustable damping and preload for a wheel travel of 270 mm. It was fitted with drum brakes and had a front tyre of 90/90-21 and a rear tyre of 12/90-18, with a wheelbase of 1450 mm and a wet weight of 106.5 kg. Its fuel capacity was 13 litres.


Technical specifications:

Make Model: Yamaha IT 250

Motorcycle technical specifications
Year1982 – 83
EngineTwo stroke, single cylinder, read valve
Capacity246 cc / 15.07 cu-in
Bore x Stroke70 x 64 mm
Cooling SystemAir cooled
Compression Ratio9.8;1
Exhaust systemUpswept expansion chamber with USFS-approved spark arrestor and silencer
Induction30mm Mikunis carburetor
IgnitionCDI
StartingKick
Max Power32.2 hp @ 7500 rpm
Max Torque22.6 / 3.12 kg-m @ 7500 rpm
Transmission6 Speed
Final DriveChain
Gear Ratio(1) 32/12, 2.666 (2)30/15, 2.000(3)25/16, 1.563(4)25/20, 1.250 (5)23/22, 1.045(6)21/24,0.875
FrameSingle-downtube, full-cradle chrome-moly frame with aluminum box-section swing arm
Front SuspensionAir-assisted, oil-damped fork
Front Wheel Travel380 mm /
Rear SuspensionAluminum-bodied monoshock with adjustable damping and preload producing
Rear Wheel Travel270 mm /
Front BrakesDrum 130 x 22mm shoes
Rear BrakesDrum 150 x 25mm shoes
Front Tyre90/90 -21
Rear Tyre12/90 -18
Rake29 degrees
Trail125 mm / 4.9 in
Wheelbase1450 mm / 57.0 in
Wet Weight106.5 kg / 234.7 lbs
Fuel Capacity13 Litres / 3.4 US gal