MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Yamaha Specifications

yamaha DT 400 (1974-75)

Entry updated

yamaha DT 400 (1974-75)

At a glance

Capacity
397 cc / 24.2 cu-in
Power
23 hp / 17.1 kW @ 5500 rpm
Torque
3.8 kg-m / 27.5 lb-ft @ 5000 rpm

The full picture.

The Yamaha DT 400 was a popular model produced from 1974-75. Its two-stroke engine was a single cylinder with a red valve system, and had a capacity of 397cc. Cooling was achieved by air. The compression ratio was 6.4:1 and it featured a single 28mm Mikuni carburetor and CDI ignition. The maximum power was 23 hp/17.1 kW at 5500 rpm, with max torque of 3.8 kg-m/27.5 lb-ft at 5000 rpm. The transmission was a five-speed with final drive by chain. The front suspension was telescopic forks, while the rear suspension used a swinging arm fork. The front and rear brakes were both drum types. The wheelbase measured 1410mm/55.5 in, and dry weight was 124kg/272lbs. Wet weight was 141kg/310.9lbs with a 9-liter/2.3 US gallon fuel capacity. The top speed was 87mph, and standing quarter mile was 16.5 seconds at 74.5 mph.


Technical specifications:

Make Model: Yamaha DT 400

Motorcycle technical specifications
Year1974 – 75
EngineTwo stroke, single cylinder, read valve
Capacity397 cc / 24.2 cu-in
Bore x Stroke85 70 mm
Cooling SystemAir cooled
Compression Ratio6.4:1
InductionSingle 28mm Mikuni carburetor
IgnitionCDI
StartingKick
Max Power23 hp / 17.1 kW @ 5500 rpm
Max Torque3.8 kg-m / 27.5 lb-ft @ 5000 rpm
Transmission5 Speed
Final DriveChain
Front SuspensionTelescopic forks
Rear SuspensionSwinging arm fork
Front BrakesDrum
Rear BrakesDrum
Front Tyre3.00-21
Rear Tyre4.00-18
Wheelbase1410 mm / 55.5 in
Dry Weight124 kg / 272 lbs
Wet Weight141 kg / 310.9 lbs
Fuel Capacity9 Litres / 2.3 US gal
Standing 1/4 Mile16.5 sec / 74.5 mph
Top Speed87 mph