The Yamaha DT 125RE Everts Replica motorcycle was produced between 2003 and 2004. Powered by a two-stroke, single cylinder, reed-valve engine with a capacity of 123 cc, it has a compression ratio of 6.8:1 and a maximum power of 14.7 hp at 7000 rpm. The bike features a kick starter, a wet multiplate clutch, and a six-speed transmission. Its front suspension consists of 41mm telescopic forks with a front wheel travel of 170mm, while the rear suspension is a monocross linkage with a wheel travel of 200mm. Front and rear brakes are both single-disc, measuring 230mm and 220mm, respectively. The bike has a ground clearance of 270mm, a seat height of 885mm, and a dry weight of 116kg. It has a fuel capacity of 10 litres and a top speed of around 70 mph. Despite its small size and modest horsepower, the Yamaha DT 125RE Everts Replica is a versatile off-road bike that is suitable for beginners and experienced riders alike.
Technical specifications:
Make Model: Yamaha DT 125RE Everts Replica
| Year | 2003-04 |
|---|---|
| Engine | Two stroke, single cylinder, reed-valve |
| Capacity | 123 cc / 7.5 cu-in |
| Bore x Stroke | 56 X 50 mm |
| Compression Ratio | 6.8:1 |
| Lubrication | Autolube |
| Oil Capacity | 1.2 Litres |
| Induction | Mikuni 28 SS |
| Ignition | CDI |
| Starting | Kick |
| Max Power | 14.7 hp / 10.8 kW @ 7000 rpm |
| Max Torque | 1.7 kgf-m / 16.3 Nm @ 7000 rpm |
| Clutch | Wet multiplate |
| Transmission | 6 speed |
| Final Drive | Chain |
| Front Suspension | 41mm Telescopic forks |
| Front Wheel Travel | 170 mm / 6.6 in |
| Rear Suspension | Monocross linkage |
| Rear Wheel Travel | 200 mm / 7.9 in6.6 in |
| Front Brakes | Single 230mm disc |
| Rear Brakes | Single 220mm disc |
| Front Tyre | 80/90 -21 |
| Rear Tyre | 110/80 -18 |
| Dimensions | Length 2135 mm / 81.0 in Width 820 mm / 32.2 in Height 1255 mm / 49.4 in |
| Wheelbase | 1415 mm / 55.7 in |
| Seat Height | 885 mm / 34.8 in |
| Ground Clearance | 270 mm / 10.6 in |
| Dry Weight | 116 kg / 255.7 lbs |
| Fuel Capacity | 10 Litres / 2.2 gal |
