Victory Kingpin (2008-09)

The Victory Kingpin motorcycle from 2008-09 has a four-stroke, 50-degree V-twin engine with a capacity of 1634cc. It also features electronic fuel injection, a wet multi-plate clutch, and a six-speed transmission. The front suspension is a telescopic fork with 130mm of travel, while the rear suspension is a single mono-tube gas forged and cast aluminum with a rising-rate linkage, providing 100mm of travel. The front and rear brakes each have a single 300mm floating rotor, with a four-piston caliper and a two-piston caliper, respectively. The bike has a seat height of 673mm and a dry weight of 297kg. It has a fuel capacity of 17 liters and comes with a carbon fiber reinforced belt final drive. Overall, the Kingpin has a GVWR of 549kg and 1210lb.

---

Technical specifications:

Make Model: Victory Kingpin

Year: 2008 – 09

Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder

Capacity: 1634 cc / 100 cu-in

Bore x Stroke: 101 x 102 mm

Cooling System: Air / oil

Compression Ratio: 9.8:1

Induction: Electronic Fuel Injection with 44mm throttle bodies

Starting: Electric

Battery: 12 volts / 18 amp hours

Clutch: Wet, multi-plate

Transmission: 6 Speed

Final Drive: Carbon Fiber Reinforced Belt

Front Suspension: 43mm Inverted cartridge telescopic fork

Front Wheel Travel: 130 mm / 5.1 in

Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage

Rear Wheel Travel: 100 mm / 3.9 in

Front Brakes: Single 300mm floating rotor 4 piston caliper

Rear Brakes: Single 300mm floating rotor 2 piston caliper

Front Tyre: 130/70 -21

Rear Tyre: 180/55 B18

Seat Height: 673 mm / 26.5 in

GVWR: 549 kg / 1210 lbs

Dry Weight: 297 kg / 654 lbs

Fuel Capacity: 17 Litres / 4.5 US gal